rodntod · Oct 29, 2012

Just had another look at the readings now the car has cooled down a bit.

EDC is showing coolant temp as 12.10 degrees :clap2:
BECM is showing c/temp as 255 ???
Air temp is reporting a temp of -38.88.
Now i know its cold but FFS.

Datatek · Oct 29, 2012

rodntod said:
Just had another look at the readings now the car has cooled down a bit.

EDC is showing coolant temp as 12.10 degrees :clap2:
BECM is showing c/temp as 255 ???
Air temp is reporting a temp of -38.88.
Now i know its cold but FFS.

If your car has an EGR and MAF, the temperature reading means nothing as the sensor is not fitted, the air temperature is obtained from the MAF.
BECM temperature is nonsensical, I'll report it to BBS. Engine temp for the EDC and the gauge use different sensors.

rodntod · Oct 29, 2012

Think tomorrow i will diss battery again and check clean and refit all relevant earths incl BECM.

Very strange how the temp gauge registers normally when in BECM diagnostic mode,and every other dash instrument is off

Cheers for your input so far Keith.

TTC · Mar 21, 2013

what was the result? did you fix this?

Datatek · Mar 22, 2013

TTC said:
what was the result? did you fix this?

The gauge not working was I believe the sensor. The BECM temperature reading is an unconverted reading from the sensor and ranges from 255 at or below freezing to zero at about 120C.

rodntod · Mar 22, 2013

Datatek said:
The gauge not working was I believe the sensor. The BECM temperature reading is an unconverted reading from the sensor and ranges from 255 at or below freezing to zero at about 120C.

Holy Dead Thread Resurrection Batman!!!!

You are right Keith it turned out to be the wrong sensor in the car ,and again thanks for all your help.
Ed

wammers · Mar 22, 2013

It was an engine change. Possibly from an Omega, the Vauxhall temp sensor fitted was not talking to the Range rover BECM.

rodntod · Mar 22, 2013

wammers said:
It was an engine change. Possibly from an Omega, the Vauxhall temp sensor fitted was not talking to the Range rover BECM.

Spot on Tony,great memory,and many thanks to you as well for your help and diagnosis with the problem.

wammers · Mar 22, 2013

rodntod said:
Spot on Tony,great memory,and many thanks to you as well for your help and diagnosis with the problem.

Yeah it was a good thread. Knowledge gained and info spread. Or so i thought. Maybe some people need to read more than the last page.

rodntod · Mar 22, 2013

wammers said:
Yeah it was a good thread. Knowledge gained and info spread. Or so i thought. Maybe some people need to read more than the last page.

Agreed

rodntod

Active Member

Datatek

Well-Known Member

rodntod

Active Member

TTC

New Member

Datatek

Well-Known Member

rodntod

Active Member

wammers

No longer with us, RIP

rodntod

Active Member

wammers

No longer with us, RIP

rodntod

Active Member

Similar threads