paularcher · Feb 23, 2018

Hi the other day I was driving my2002 freelander 1 and the eml light came on and I lost power it drove another half mile and cut out ant would not start it got the bmw engine so I had it plugged in and got code p1260 low pressure fuel sensor so got a knee one fitted and it’s still the same no start can anyone help

Nodge68 · Feb 23, 2018

Low pressure fuel pump would be my guess. You need to check the live data on a suitable diagnostic device. You're looking for low a pressure of 360 Kpa.

paularcher · Feb 23, 2018

Nodge68 said:
Low pressure fuel pump would be my guess. You need to check the live data on a suitable diagnostic device. You're looking for low a pressure of 360 Kpa.

Is this the pump on left front chassis leg

pardec · Feb 23, 2018

Its the one thats behind the O/S/R wheel, attached to the chassis

Nodge68 · Feb 23, 2018

paularcher said:
Is this the pump on left front chassis leg

There are 2 low pressure fuel pumps on an early 2002. 1 is in the fuel tank, the other is in the engine bay. Both pumps need to work or it won't run.

paularcher · Feb 23, 2018

pardec said:
Its the one thats behind the O/S/R wheel, attached to the chassis

So there’s 2 pumps

pardec · Feb 23, 2018

maybe

paularcher · Feb 23, 2018

Nodge68 said:
There are 2 low pressure fuel pumps on an early 2002. 1 is in the fuel tank, the other is in the engine bay. Both pumps need to work or it won't run.

Has mine one in the tank or rear wheel arch

pardec · Feb 23, 2018

It depends when in 2002.

Mine had 1 LP fuel pump but early ones have 2 ( tank and under bonnet )

paularcher · Feb 23, 2018

Where is the crank sensor located on these bmw engine

Nodge68 · Feb 24, 2018

paularcher said:
Where is the crank sensor located on these bmw engine

Underneath the starter. I doubt it's that tbh. If the fuel pressure isn't correct it isn't going to run. The code you had suggested fuel pressure, not the crank sensor.

paularcher · Feb 24, 2018

Nodge68 said:
Underneath the starter. I doubt it's that tbh. If the fuel pressure isn't correct it isn't going to run. The code you had suggested fuel pressure, not the crank sensor.

I took new sensor of this morning should there be diesel coming out when turning engine over with sensor out also the sensor look smaller

paularcher · Feb 27, 2018

Nodge68 said:
Underneath the starter. I doubt it's that tbh. If the fuel pressure isn't correct it isn't going to run. The code you had suggested fuel pressure, not the crank sensor.

Hi nodge I hit the tank today with hammer and the pump worked but stops every now and then also when driving it home the power won’t rev up any help

Nodge68 · Feb 27, 2018

That sounds like the tank pump has failed. They do pack up so well worth changing.

paularcher · Feb 27, 2018

Nodge68 said:
That sounds like the tank pump has failed. They do pack up so well worth changing.

Would I want to Change filter now to

paularcher

Member

Nodge68

Well-Known Member

paularcher

Member

pardec

Active Member

Nodge68

Well-Known Member

paularcher

Member

pardec

Active Member

paularcher

Member

pardec

Active Member

paularcher

Member

Nodge68

Well-Known Member

paularcher

Member

paularcher

Member

Nodge68

Well-Known Member

paularcher

Member

Similar threads