blue beasty
Leaks an prone to bits dropping off
Maybe because people make 9 posts in 6 years?
I was thinking no one knew the answer to the OP's last 2 questions. Or he didn't say please 
I was thinking no one knew the answer to the OP's last 2 questions. Or he didn't say please
Was it posted inappropriately…
tomcat59alan
Well-Known Member
No response came the replyIs this a genuine question that requires a response?
tomcat59alan
Well-Known Member
And your question was? I'm not trawling back 6 years to find it
RangeRoller dt
Well-Sprung Member
Wants to know about a lock pin for L322 handbrake. As far as I’m aware L322 handbrake cable is self adjusting and only adjustment is through the inspection hole in the rear discs that you poke a screwdriver in?
gold rover
Well-Known Member
Seems to be loads of posts being answered. Almost on a daily basis.including #1 on this thread
Addit: Just wondering: is this thread a p take? It cannot be serious, maybe just a fishing trip. If so, I will bite.
Almost 6 years , 9 posts , the first of which the OP claims "am quite knowledgeable and skilled in the repair and maintenance of Landover vehicles, if I can be of assistance to anyone please feel free to ask".
4 of which are then to ask questions
Soooo that makes 1 to say knowledgeable, 4 to start threads to ask questions, 2 more inside a thread to ask more questions.
That's 7 so far without sharing his knowledge and skill , in any of the thousands? of questions posted since joining. Maybe the other 2 were responses to questions?
Still a bit of a bloody cheek to get stroppy, with that track record.
Takes the hook back out, steals the bait and swims off.
Addit: Just wondering: is this thread a p take? It cannot be serious, maybe just a fishing trip. If so, I will bite.
Almost 6 years , 9 posts , the first of which the OP claims "am quite knowledgeable and skilled in the repair and maintenance of Landover vehicles, if I can be of assistance to anyone please feel free to ask".
4 of which are then to ask questions
Soooo that makes 1 to say knowledgeable, 4 to start threads to ask questions, 2 more inside a thread to ask more questions.
That's 7 so far without sharing his knowledge and skill , in any of the thousands? of questions posted since joining. Maybe the other 2 were responses to questions?
Still a bit of a bloody cheek to get stroppy, with that track record.
Takes the hook back out, steals the bait and swims off.
Last edited:
To be fair the OP did help someone with their ball joints once 5 years ago
gold rover
Well-Known Member
Was it MackersTo be fair the OP did help someone with their ball joints once 5 years ago
HelloMark,Seems to be loads of posts being answered. Almost on a daily basis.including #1 on this thread
Addit: Just wondering: is this thread a p take? It cannot be serious, maybe just a fishing trip. If so, I will bite.
Almost 6 years , 9 posts , the first of which the OP claims "am quite knowledgeable and skilled in the repair and maintenance of Landover vehicles, if I can be of assistance to anyone please feel free to ask".
4 of which are then to ask questions
Soooo that makes 1 to say knowledgeable, 4 to start threads to ask questions, 2 more inside a thread to ask more questions.
That's 7 so far without sharing his knowledge and skill , in any of the thousands? of questions posted since joining. Maybe the other 2 were responses to questions?
Still a bit of a bloody cheek to get stroppy, with that track record.
Takes the hook back out, steals the bait and swims off.
No not done yet but its been on back burner as i had the delightful task of replacing front subframe, think its ecu so will get one and replace, seems like I have upset a little nest of internet trolls ie "blue bee sting" and his lamentable little group of keyboard warriors dont know why and certainly wasn't being stroppy as stated just passing honest comment, ah well guess LR ownership not the same group it used to be, present company excepted
blue beasty
Leaks an prone to bits dropping off
To be fair, complaining on a forum that you rarely comment on that there isn't many comments is a lot more troll like than pointing out the irony
gold rover
Well-Known Member
Only keyboard warrior here is you. I'll happily say to your face what I wrote here. Which is more than some on here would do,
Admit you were bitching and move past. This post just shows you to be a one hit wonder who doesn't like it pointed out. How would you know what the group is like, or was like, when you have never been part of it. Unless you have been a lurker, taking all the help offered ,daily, by the guys and girls on here, but giving nothing.
You're now at 10 posts in 6 years and despite claiming to be knowledgeable you have only given one helpful post, and ignored thousands of pleas for help. You have only ever taken. You have turned up when you wanted something. Then, months later, after your posts were lost in the thousands of posts, and hundreds of pleas for help, you threw a strop, because you never got an answer. Did I mention you answered none of the pleas for help from others,.
Unlike your Billy Big B°°°° introduction post few on here have ever claimed to be knowledgeable, though many are incredibly so, but we all try to help where we can.
You were being stroppy and your latest post is still stroppy and bitchy. So you can go to the naughty step and join the other grown men, in the keyboard kindergarten, bitching and mouthing off online but wouldn't dare do it in real life.
P.s if you don't like my reply TOUGH! Quit bitching and no-one will be able to call you out on bitching. It really is that easy.
Last edited:
Tricky of York
Well-Known Member
Has it occurred to you that at the time of posting a question there may not be anyone free to read or answer your post? Perhaps you should search first as mentioned earlier then post your question with a little more appreciation for the help you seek! Just a thought.
Back to the ignition switch of which you asked about, I had a similar issue and started by applying a little penetrating fluid in the switch before tearing the dash apart. Remarkably after some jiggling and making sure there was at least 13 volts in the battery it started to work again, took about 48 hours wait though.
Let us know how you get on and if you still need assistance. Don’t be lead by fault codes they can be a blind ally if your battery is low.
Cheers Tricky
Tricky of York
Well-Known Member
Sorry posted the ignition info in the right thread now. It’s early for me.
Cheers Tricky
Cheers Tricky
RangeRoller dt
Well-Sprung Member
If your’re gonna be a twat I’m not surprised no one bothers.
