mutsnutz
Well-Known Member
that was the plan grrrr just had a spare pump and was thinking of getting it refurbedI'd be going down the diag route before shelling out on a FIP though!
What diag did you use?
Nanocom would tell you Lynx is crap. Try cleaning the contacts on the plug and socket from the pump to loom.
Fuel loop fault is more than likely fuel feedback pot problem. So any bad contact on the plug and socket could cause this. Outside chance but worth a punt.
Re con pump is around the £600.00 mark plus a returnable deposit about £100.00 til old one is returned. If you can't fit it yourself more pennies to pay someone who can.
