K

Kevin66

Member

• Apr 18, 2019

• #1

Have a 1996 range rover p38 dse as I've said yesterday run like a train. But today went to go out nothing engine starts fine but no drive had no problems with it just getting 35mph . Coming up do not have EAS running on springs Any help please???

 

marjon

Well-Known Member

Full Member

• Apr 18, 2019

• #2

Yes myself and @DanClarke advised why you are seeing the message. Gearbox/drive is a different issue.
More vehicle detail for the good guys to help, and they will with the right info

J

 

Henry_b

Think outside, no box required.

• Apr 18, 2019

• #3

Have you lost Reverse too?

If not try selecting manual 1st and see if she moves..

 

K

Kevin66

Member

• Apr 18, 2019

• #4

marjon said:

Yes myself and @DanClarke advised why you are seeing the message. Gearbox/drive is a different issue.
More vehicle detail for the good guys to help, and they will with the right info

J

Click to expand...

Yeah 2.5bmw diesel engine 1996range rover p38 dse been fine until today nothing no 123d high or low engine running fine .had no problem just went to go out today and no gears just message 35mph come up but nothing ?????

 

ukadamwest

Well-Known Member

• Apr 18, 2019

• #5

when was gearbox oil checked last ?

 

RangeRoller dt

Well-Sprung Member

• Apr 19, 2019

• #6

Hi Kev,
your 35mph max warning is probably the EAS panicking. Did you do the coil conversion with rewired BECM? Is it always there?

 

K

Kevin66

Member

• Apr 19, 2019

• #7

Oil ok feel electrics as manual/sport button not lighting up

 

K

Kevin66

Member

• Apr 19, 2019

• #8

Yeah lost the lot

RangeRoller dt said:

Hi Kev,
your 35mph max warning is probably the EAS panicking. Did you do the coil conversion with rewired BECM? Is it always there?

Click to expand...

No brought it done been fine

 

wammers

No longer with us, RIP

Donater

• Apr 19, 2019

• #9

Forward drive clutch is selected manually it does not need any electrical inputs. Even if none of other gears work it should move in first gear.

 

K

Kevin66

Member

• Apr 19, 2019

• #10

No nothing in any gear like I said the day before it was fine . Just went to go out and nothing.

 

wammers

No longer with us, RIP

Donater

• Apr 19, 2019

• #11

Kevin66 said:

No nothing in any gear like I said the day before it was fine . Just went to go out and nothing.

Click to expand...

Have you checked the fluid level correctly? Is the gear cable actually connected to the XYZ switch?

 

kermit_rr

Very

Full Member

• Apr 19, 2019

• #12

Someone nicked yer gearbox?

 

Datatek

Well-Known Member

• Apr 19, 2019

• #13

Nothing if you select 1st manually? Put fuse 11 in under the drivers seat by any chance?
It's possible the Transfer box ECU has failed and shifted it into neutral.

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Apr 19, 2019

• #14

Sprag Clutch gone????

(Not that I know what one is, but have heard them mentioned before when discussing lack of drive!)

 

wammers

No longer with us, RIP

Donater

• Apr 19, 2019

• #15

Saint.V8 said:

Sprag Clutch gone????

(Not that I know what one is, but have heard them mentioned before when discussing lack of drive!)

Click to expand...

If a sprag clutch has failed it should drive in first gear. But not in D.