mr glee

mr glee

Active Member
Just noticed I have no brake lights fuse is ok can't see that both bulbs blew at the same time but do they share an earth if so where is it ?.also brake light switch abs 4 pin type would this be two circuits open with pedal up and two close when pedal is pressed down?.
 
Discounting the wiring, the brake light circuit is very simple. There's the fuse on the live side of the circuit, the switch is next before the power is fed to the bulbs. So no brake lights is fuse, switch or bulbs, providing the wiring and grounds are ok.;)
 
Each lamp has it's own earth point not common so quite unlikely to be earth issue, if none of the 3 brake lamps is working and the fuse is OK then the switch is the first suspect
mr glee said:
also brake light switch abs 4 pin type would this be two circuits open with pedal up and two close when pedal is pressed down?.
Click to expand...
Yes
 
mystery said:
may help does the high level work if so check bulbs
Click to expand...

It may help you in knowing that this thread it for a D1 and the OPs D1 is a1997MY. So why not post the correct diagram for the D1 and one that’s with out a high level brake light.
 
discool said:
So why is that then when only the last D1 model year had that feature.
Click to expand...
I have no ideea i just know that it's shown in all the 300Tdi diagrams i've seen back to '95 and it's shown in all the workshop manuals how to change the bulb in the repairs section
 
sierrafery said:
I have no ideea i just know that it's shown in all the 300Tdi diagrams i've seen back to '95 and it's shown in all the workshop manuals how to change the bulb in the repairs section
Click to expand...
I expect the high level stop light circuit In the diagrams was added also for non UK spec discos in 1995, American/ Japanese markets and others maybe.
So one diagram fits all much like RAVE manual for the D1 I’ve seen what ever the engine fitted. But in the UK that lamp wasn’t fitted till the 98MY D1 arrived.
 
mr glee said:
Just noticed I have no brake lights fuse is ok can't see that both bulbs blew at the same time but do they share an earth if so where is it ?.also brake light switch abs 4 pin type would this be two circuits open with pedal up and two close when pedal is pressed down?.
Click to expand...
Anyway........get a new switch they're only a few quid before you rewire the whole car.
 
MY1997 electrical troubleshooting manual LRL0077ENG 4TH edition shows high level but no legend for high level brake light
Discovery 1 MY97 - Electrical Troubleshooting Manual (LRL0077ENG 4th Edition)-161.png
 
You must log in or register to reply here.

Similar threads

M
2 Amigos [Solved]
Replies
14
Views
2K
Arctic2
Arctic2
K
Disco 4 (LR4) xenon lights
Replies
0
Views
456
kiven
K
T
No Brake lights and reversing lights help please
Replies
11
Views
1K
Stanleysteamer
Stanleysteamer
J
Disco 2 Brake light problem - third light only & taillights go off when braking
Replies
1
Views
468
sierrafery
sierrafery
S
D2 td5 new electric gremlings (brakes, gearbox, M+S)
Replies
14
Views
2K
suprlite
S