cosmicjohn

cosmicjohn

Member
hi guys and girls

am new here

i bought myself a 50th anniversary 300 tdi for £500

pics will follow if i find out how to do it lol

chassis is solid
boot floor so so
sills bothsides rotten two little holes not so bad
rear arches bad and behide 1/4 panels too
bat tray shot


looking for help to rebuild

thanks
john
 
Last edited:
Lots of repair panels available. More cost effective to weld yourself if you can but small jobs wouldnt warrant buying the equipment.
Prepare for more rust than you can see but if you can sort that a disco is reliable and good fun.
 
20141218_141147.jpg

























someone did try before to repair the arch wish they just left it alone :(









 
Last edited:
so i think i have my work cut out lol not even looked at front end need to renew rear cross member not bad but am fussy and am down this far may as well
 
Yup the rear x member is gone! Yrm do them for £120 or something. How did you remove boot floor? Drill spot welds or cut out?
 
Looks like a good project and your well into it. It must be great to have all the right tackle and a place to do it.
 
This picture caught my eye, check the tubular cross member for the "A" frame.



The flat plates look quite corroded, best give the slap with a hammer test before you weld the floor in, you'll never do it from underneath once it is in!!!

Best of luck saving it matey, buy replacement panels for it and spend, spend, spend, it will be well worth it in the long run, time saved and less stress trying to blow holes, I mean weld in patches, Just cut the rot out, drill an spot it in place ;)

PS.

If the cross member side plates have rotted through look HERE to see y build thread where I tackled exactly the same.
 
Oh, and tip for the seat belt bolts, grind head off, drill out the center and then work it out with vise grips, think it is M8X1.5 but try a tap in and just replace with a new bolt ;)
 
As access is now good you should paint cgassis, clean ir bypass the sedimenter and check the a frame ball joint. Easier to change with boot out (but still a pain!). Good luck
 
ronsealdeath said:
As access is now good you should paint cgassis, clean ir bypass the sedimenter and check the a frame ball joint. Easier to change with boot out (but still a pain!). Good luck
Click to expand...
sedimenter that will be the filter at the back i guess i was going to keep it so just bypass it yeah am going to brush paint it body tex it and waxoil everywhere
 
Last edited:
cosmicjohn said:
true mate i do have all the stuff to do it but its time:( but anyone willing to give a hand will be rewarded :)
Click to expand...

Don't have much spare time but if you need a hand with anything, let me know.
Not that far away from you.

Had a 200, 300 and two TD5's
 
You must log in or register to reply here.

Similar threads

S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
2K
sv_dOnut
S
bankz5152
SOLD
Replies
2
Views
2K
bankz5152
bankz5152
H
My RRC Project
9 10 11
Replies
201
Views
24K
resto_d1
R
B
New Disco Owner here
Replies
17
Views
2K
bendisco
B
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K