Because life is complicated (and expensive) the gearbox is out ... and am stipping it down.
Look at the crap under the gear levers ... :oops:

gearlever-crud.jpg

HL_Crud.jpg
 
miktdish said:
So:

New (G) is £250 delivered
Refurb is £192 delivered

New starter ring is £52
New dowels are £5
Skim (1 hour drive) Fife = £70

No brainer really.
Off to Kircaldy tomorrow.
Click to expand...
Andy Anderson skim it by any chance? He did mine mate.
 

Attachments

  • IMG_2077.jpeg
    IMG_2077.jpeg
    441.7 KB · Views: 9
  • IMG_2032.jpeg
    IMG_2032.jpeg
    420.9 KB · Views: 9
  • IMG_1966.jpeg
    IMG_1966.jpeg
    402.9 KB · Views: 9
miktdish said:
I think it's the 'new', mine is just 2 wires with spades ... soon to be converted to lucas connectors.
Click to expand...
With parts like this on mine I made up a short adapter loom with an econoseal plug on one end and spade on the other so that future replacements are a straight fit rather than needing modification before fitting. I had the opposite problem of a late model 300tdi harness onto a 200tdi and tl77 combo.
 
There was a thread on the forum a month or so ago where the OP posted a pic of a plug that looked very similar to the one in your pic and asked what it should plug into and I think he said it was "near" the g/box area
 
You must log in or register to reply here.

Similar threads

miktdish
LT230 (1.222 #28D) SOLD
Replies
2
Views
571
miktdish
miktdish
S
transfer box diff gears
Replies
1
Views
496
tottot
tottot
M
Discovery1 lt230 in place of LT230R from a 12D?
Replies
3
Views
634
MrF
M
P
LT230 Tachograph Sender (Drivers Hours not RPM...)
Replies
9
Views
841
Paul in Sussex
P
S
what's the state of my transfer box?
Replies
2
Views
934
tottot
tottot