L

landmark

Active Member

• Aug 1, 2009

• #1

:doh:Hi all after some advice, just put a pair of new air springs on and now the damm thing won't pump up. I have hot wired the pump to check pump is ok . 1999 td5 discovery Any ideas' Cheers Mark

 

F

fireman-andy

New Member

• Aug 1, 2009

• #2

ride height sensors ??

 

L

landmark

Active Member

• Aug 1, 2009

• #3

any idea how i can test these

 

Urban Panzer

New Member

• Aug 1, 2009

• #4

Simple but can be easily overlooked

You have got ALL the doors and bonnet / boot shut haven't you, the compressor won't run with ANYTHING open

 

L

landmark

Active Member

• Aug 2, 2009

• #5

all doors and bonet etc is closed working from open drivers windo. I've even tried pressing the offroad position on dashboard but this will not initiate. Any more thoughts? cheers Mark

 

thebiglad

Well-Known Member

• Aug 2, 2009

• #6

landmark said:

all doors and bonet etc is closed working from open drivers windo. I've even tried pressing the offroad position on dashboard but this will not initiate. Any more thoughts? cheers Mark

Click to expand...

You have got the engine running I take it ?

 

Urban Panzer

New Member

• Aug 2, 2009

• #7

Carefully disconnect the ride height sensor arm from the radius arm mounting, unplug it and move it through its full range of travel a few times, repeat this on both sides.........reconnect and re test..........this "may" help it.

Other wise, if you can get the pump to run by hot wiring it, do that till the bags are inflated, then reconnect it back to the vehicle electrics and see what happens then.