sejo_tt

Member

• Apr 6, 2012

• #1

Hello All

I wonder if anybody can help me, I am in the process of taking off the cylinder head on my Rover TD4 (I know I am crazy),
Anyway what I need to know, is it possible for me to do the timing on my cylinder head without a td4 timing kit as I am trying to save money by not taking it to a garage,I have some experience on timing engines but none on this one.
Any help or advise would be most appreciated.

 

Chaser

New Member

• Apr 6, 2012

• #2

It's probably better to buy a timing kit so it can be set accurately, you can always recover some of the cost by selling it on ebay afterwards. Your still going to save a packet compared to garage prices.

This Sealey kit is a reasonable price... Sealey VSE5666 Diesel Timing Kit Chain Drive - Expresstools.co.uk

 

sejo_tt

Member

• Apr 6, 2012

• #3

Thanks for advise most appreciated but is there any documentation on timing this engine again thanks.

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Apr 6, 2012

• #4

Rave

 

sejo_tt

Member

• Apr 6, 2012

• #5

Thanks

 

sejo_tt

Member

• Apr 14, 2012

• #6

Ok guys took off the head to do some work and put it back up got the tool to set back the timing everything looked good when setting back up the head and setting up the timing but it's not starting the engine is tumbling but will not start fuel pump is working because i'm getting fuel up to the injectors if i spray some quick start in the intake manifold it will start but cut off any suggestions thanks.

 

Kizzeh

Well-Known Member

• Apr 14, 2012

• #7

You sure your not a tooth or 2 out on the timing?
what made you take the head off?

 

sejo_tt

Member

• Apr 14, 2012

• #8

Kizzeh said:

You sure your not a tooth or 2 out on the timing?
what made you take the head off?

Click to expand...

Change the head gasket.

 

Chaser

New Member

• Apr 14, 2012

• #9

If it runs OK on the easy start then it could be the cam sensor at fault.....

 

sejo_tt

Member

• Apr 14, 2012

• #10

Chaser said:

If it runs OK on the easy start then it could be the cam sensor at fault.....

Click to expand...

Thanks I thought of that and changed the cam sensor and it's still not starting.

 

Chaser

New Member

• Apr 15, 2012

• #11

Cold be a few things then depending on its previous running condition and what you may of disturbed.
Is there ant smoke emitted from exhaust when cranking indicating that fuel is being injected?
any issues with crank sensor or its wiring?
adequate fuel pressure?

 

sejo_tt

Member

• Apr 15, 2012

• #12

Chaser said:

Cold be a few things then depending on its previous running condition and what you may of disturbed.
Is there ant smoke emitted from exhaust when cranking indicating that fuel is being injected?
any issues with crank sensor or its wiring?
adequate fuel pressure?

Click to expand...

Thanks for the suggestions I went over the timing with a buddy and it was a bit off so we re-timed it and got it started ,Also is there a way to manually reset the CPU again thanks.

 

Kizzeh

Well-Known Member

• Apr 15, 2012

• #13

Glad you got it working ok