We are trying to get this module bought and setup so that it's ready for when I get bakc. Seemingly takes a few days to get code or something
 
We are trying to get this module bought and setup so that it's ready for when I get bakc. Seemingly takes a few days to get code or something
 
We are trying to get this module bought and setup so that it's ready for when I get bakc. Seemingly takes a few days to get code or something
 
All sorted, module in place. Will hopefully manage to meet up this weekend and get his smoker sorted!

Also updated my LZIR post to show I have EDC module now.
 
Right OK,using nanocom, immobiliser off, alarm off.

Checked fuel going into pump, OK.

Nanocom stating no communication with outstations.

No fuel at injectors.

No warnings on dash.

Turning over fine no starting
 
Right OK,using nanocom, immobiliser off, alarm off.

Checked fuel going into pump, OK.

Nanocom stating no communication with outstations.

No fuel at injectors.

No warnings on dash.

Turning over fine no starting


Is resyncing becm to ecu separate to turning security off.

Turn immob off
Turn alarm off
THEN resync becm to ecu?

If so then all we done is turn security off correct? We should then resync becm to ecu?
 
Yes very much appreciated Martin. That's her all washed and brought up to temp. Few rattles but smoother than my old 98 dse. Had a wee drive and it's all good. Next to get everything swapped over from old to new then mot time.

Happy days
 

Similar threads