yes all history i imagine , it will do a rescan after you've pressed clear all

or send it to a printer or email


here's mine

airbags we know about

system pressure is low aircon

and the other one suppose to be ref the bad battery in my remote, but not 100 percent verified

IMG_1772.JPG


suspension one , got to adjust it, it wished for it to settle for a bit first , also i was sitting in the bloody thing like an idiot

IMG_0178.PNG
 
Just flashed my first ECU!
Bit scary at first when all the warning lights flash and needles move
Wanted the 4x4 information screen

d1.jpg
d2.jpg


Right Gary whats next? @gstuart
 
Just flashed my first ECU!
Bit scary at first when all the warning lights flash and needles move
Wanted the 4x4 information screen

View attachment 111434 View attachment 111435

Right Gary whats next? @gstuart

putting the kettle on , waiting for me to turn up, then make me a lovely cuppa , fit my new steps by the time i've finished

slap, ouch i didn't mean it, there's no need to throw me in the laaaaaaaaaaaaakkkkkeeeee
heeeeeeeeeeelllllllppppp, its cold in here :p:p:D


front diff breather :D

checked front footwell carpets for any damp, water can get in under the A pillar windscreen covers

ordered a new spare wheel protection plate ,

had a look , passengers side, back wheel , where the handbrake cable , next to compressor pipes hasn't chaffed against the chassis , i did mine and put sleeving over it

ordered an egr blank kit

removed ur map sensor to see if it's dirty ,

flashed the main ecu to MY 2007 , puts the clock onto the instrument display ,

:D:D:D
 
flashed the main ecu to MY 2007 , puts the clock onto the instrument display ,

:D:D:D

Ah but the advice is when you do that to also flash the air suspension ECU. However there are 2 types of compressor and different software for each.
So is there a way to tell which one is fitted without getting down and dirty?
I'm not flashing anything till I know for sure
 
Ah but the advice is when you do that to also flash the air suspension ECU. However there are 2 types of compressor and different software for each.
So is there a way to tell which one is fitted without getting down and dirty?
I'm not flashing anything till I know for sure


when u go to the compressor ecu update it will tell u which compressor u have

hitachi or amk

the iid will also show u if there's an update for all ur ecus :D
 
I'm liking this new tool.
Very user friendly
Got the clock on the dash now. Apparently I've got the Hitachi comp fitted

d3.jpg


What's next?
None of that lifting the bonnet nonsense or lying on the ground
 
I'm liking this new tool.
Very user friendly
Got the clock on the dash now. Apparently I've got the Hitachi comp fitted

View attachment 111445

What's next?
None of that lifting the bonnet nonsense or lying on the ground

do like the iid , great bit of kit

have u reset the service history

plus have u pressed the end of the left hand stalk , turned auto door lock on , or scrolled through them

will come up settings, and go through some more extras, lol
 
have u reset the service history

plus have u pressed the end of the left hand stalk , turned auto door lock on , or scrolled through them

will come up settings, and go through some more extras, lol

Course not was left waiting nearly 8hrs for a response, must do better.
Sitting all afternoon twiddling my thumbs, so painted the Bog and Utility ceilings (twice) instead.
However will tomorrow :)
 
Course not was left waiting nearly 8hrs for a response, must do better.
Sitting all afternoon twiddling my thumbs, so painted the Bog and Utility ceilings (twice) instead.
However will tomorrow :)

u saying ur not getting good customer service , :p:p:D:D

had a bit of an off day , took the dogs out for a while ,

did u get round cleaning the map sensor
 
Not a hope, its been too cold here.
Just did all the ECU flashing whilst sitting on my bum with the heated seat on.
When your swapping out the seats on yours are you going to put the seat heaters in?
 
Not a hope, its been too cold here.
Just did all the ECU flashing whilst sitting on my bum with the heated seat on.
When your swapping out the seats on yours are you going to put the seat heaters in?

thks, lol

coming next week, guy sent them out late as it was bad weather which i said i didn't have a problem with

they are black leather , 6-8 way electric heated , just need to put my airbags and cloth covers on them

also work out the wiring , trouble is if i activate the heating in them the heater control is different , as in the control knobs there is a picture of a seat

had plenty of wiring experience on my hippo , so will see what's involved if i can just change the control knobs and not the whole thing
 

Similar threads