RangeRoller dt · Oct 13, 2019

Grrrrrr said:
straight out pipe that is massive! Looks more like it came off an Evo!

Mine was straight through rear pipe when I had it. Bout 3 1/4” bore!
May have been fitted for off-roading, May have been welded up after off-roading as rear box is main target to get ripped off

Don’t understand what you both mean the angle is off? Could be adjusted slightly but not much, the snout points down, any other angle it would point in?

RangeRoller dt · Oct 13, 2019

£200 is not bad if it lasts few years, OE rear steel section is £208 alone.

RangeRoller dt · Oct 13, 2019

Datatek said:
Got Double SS cat back twin outlet stainless on both mine.

Scrapper has original steel twin?

Grrrrrr · Oct 13, 2019

RangeRoller dt said:
Mine was straight through rear pipe when I had it. Bout 3 1/4” bore!
May have been fitted for off-roading, May have been welded up after off-roading as rear box is main target to get ripped off

Don’t understand what you both mean the angle is off? Could be adjusted slightly but not much, the snout points down, any other angle it would point in?

Snout is pointing the right way but think my back-box has a horizontal oval shape, rather than an inclined oval when fitted. Not noticeable on yours because that bl**dy Land Rover badge on the wrong level is pulling your eyes to the left with a full-frontal assault on the optic synapses.

RangeRoller dt · Oct 13, 2019

Seen some steel ones are a box sticks out like a twin, will get crumpled first time you descend steep hill off-road
ESR 3538 type -

Grrrrrr · Oct 13, 2019

Mine's still sat on axle stands. Once I can bear looking at it I'll check what mine has.

RangeRoller dt · Oct 13, 2019

Grrrrrr said:
Mine's still sat on axle stands

....
Clutch?

Datatek · Oct 13, 2019

RangeRoller dt said:
Mine was straight through rear pipe when I had it. Bout 3 1/4” bore!
May have been fitted for off-roading, May have been welded up after off-roading as rear box is main target to get ripped off

Don’t understand what you both mean the angle is off? Could be adjusted slightly but not much, the snout points down, any other angle it would point in?

Boxes are horizontal on mine.

Datatek · Oct 13, 2019

RangeRoller dt said:
Scrapper has original steel twin?

Scrapper was single pipe the other two are twin pipe.

RangeRoller dt · Oct 13, 2019

Datatek said:
Scrapper was single pipe the other two are twin pipe.

I remember you saying they are not loud like on a V8

Grrrrrr · Oct 13, 2019

RangeRoller dt said:
....
Clutch?

Still waiting for a replacement airbag. Seems it takes 2 weeks for Arnott Europe to get anything to the UK. Not quick.

Grrrrrr · Oct 13, 2019

Datatek said:
Got Double SS cat back twin outlet stainless on both mine.

Was having a paper day today (****ing it down outside) and found the receipt and and guarantee for my exhaust! It was a Double SS one like Datatek. Single pipe, cat back, sports exhaust for diesel for £302.

RangeRoller dt · Oct 13, 2019

Forgot about the collet incident.

tomcat59alan · Oct 13, 2019

RangeRoller dt said:
Forgot about the collet incident.

Grrrrrr's still trying to.

tomcat59alan · Oct 13, 2019

Henry_b said:
My Zorst is pretty well knackered now

It looks ok.

But it ain't!

Janspeed SS system me finks

Year's left in that.

Henry_b · Oct 13, 2019

tomcat59alan said:
Year's left in that.

U ain't seen the rest

tomcat59alan · Oct 13, 2019

Henry_b said:
U ain't seen the rest

Bix · Oct 13, 2019

Grrrrrr said:
Still waiting for a replacement airbag. Seems it takes 2 weeks for Arnott Europe to get anything to the UK. Not quick.

Just wait until Brexit happens.

Tenebreaux · Oct 13, 2019

RangeRoller dt said:
Forgot about the collet incident.

You just reminded me, the collets in my valve block look decidedly iffy. For the sake of a tenner decided new ones won't break the bank.

RangeRoller dt · Oct 13, 2019

Tenebreaux said:
You just reminded me, the collets in my valve block look decidedly iffy. For the sake of a tenner decided new ones won't break the bank.

If it ain’t broke don’t fix it (or fix it til it’s broke

)
Save your tenner for the other bits you’ll need

Well-Sprung Member

Well-Sprung Member

Well-Sprung Member

Technician, Bodgit & Scarper Ltd

Well-Sprung Member

Technician, Bodgit & Scarper Ltd

Well-Sprung Member

Well-Known Member

Well-Known Member

Well-Sprung Member

Technician, Bodgit & Scarper Ltd

Technician, Bodgit & Scarper Ltd

Well-Sprung Member

Well-Known Member

Well-Known Member

Think outside, no box required.

Well-Known Member

Loading...

Well-Known Member

Well-Sprung Member

Similar threads