JohnnyCrash · Aug 20, 2014

Need some help

I know as you all do that the ABS light goes out once you reach 7mph

however the mot was failed as the light didn't extinguish while in the ramp?! How do I get round this as MOT tester being an arsehole

tomcat59alan · Aug 20, 2014

Take him out in the car, show him it goes out then keep on driving and drop him off in the back of beyond.

matt1987 · Aug 20, 2014

Tell him to look at the notes on specific abs light functions as printed on the check sheet, also should be on the wall as with all the emmision control, airbag light , abs light etc or evwn better take it to the local vose office and appeal and that test station will be in a whole world of hurt with possible fine points and suspension of testing.

tomcat59alan · Aug 20, 2014

matt1987 said:
Tell him to look at the notes on specific abs light functions as printed on the check sheet, also should be on the wall as quote]
Think the tester would prefer a swift kick in the knackers, and he deserves one

mozz smith · Aug 20, 2014

hi ,:drama:
we don't have this problem in Lancashire / Cheshire do we tomcat

as tomcat says kick him in the knackers and drop him off somewhere BUT not in Lancashire or Cheshire thank-you !!!!!!
keep the prat in YORKSHIRE !!!!!

JohnnyCrash · Aug 20, 2014

mozz smith said:
hi ,:drama:
we don't have this problem in Lancashire / Cheshire do we tomcat

as tomcat says kick him in the knackers and drop him off somewhere BUT not in Lancashire or Cheshire thank-you !!!!!!
keep the prat in YORKSHIRE !!!!!

Moss I'm in Lancashire and the test centre is technically in Cheshire (hyde to be exact)

mozz smith · Aug 20, 2014

JohnnyCrash said:
Moss I'm in Lancashire and the test centre is technically in Cheshire (hyde to be exact)

oops , so not far from me then and you still cant spell moZZ
its MOZZ NOT MOSS ,, NEVERMIND ???????? SO WHEREABOUTS ARE YOU THEN ,, AND IVE NEVER HAD THAT PROBLEM IN 8 YEARS OF OWNING P38S ,, CHEERS JOHHNY

tomcat59alan · Aug 20, 2014

mozz smith said:
oops , so not far from me then and you still cant spell moZZ
its MOZZ NOT MOSS ,, NEVERMIND ???????? SO WHEREABOUTS ARE YOU THEN ,, AND IVE NEVER HAD THAT PROBLEM IN 8 YEARS OF OWNING P38S ,, CHEERS JOHHNY

Better tell him where you take your motor MOZZ

wammers · Aug 20, 2014

The tester is a prick and doesn't know what he is doing. At one time you had to be time served and two years experience. Now an NVQ and sweep the garage for a year qualifies you. Bloody ridiculous.

Rick-the-Pick · Aug 21, 2014

We could start a whole new thread on characteristics of the MOT tester.
One of my old 2 door V8 classics got failed on the gearstick being wobbly, & the car tested before mine passed with a horizontal crack straight through the middle of the windscreen.

JohnnyCrash · Aug 21, 2014

mozz smith said:
oops , so not far from me then and you still cant spell moZZ
its MOZZ NOT MOSS ,, NEVERMIND ???????? SO WHEREABOUTS ARE YOU THEN ,, AND IVE NEVER HAD THAT PROBLEM IN 8 YEARS OF OWNING P38S ,, CHEERS JOHHNY

Sorry mozz stupid phones auto correct

can any one point me to some wording so I'm not just an agro customer but an informed one

Chewster · Aug 21, 2014

Be nice, be polite:

'Please can I refer you to the relevant section in the Range Rover owners manual that explains the functionality of the ABS warning light on the P38 model, it's related to the traction control system and needs input from rolling wheels before it will extinguish. I can show you where it is clearly explained?'

The just show him the manual - it's all laid out clearly, if he doesn't get that then kick him inna nuts as suggested by several folk already. If they still won't have it then contact VOSA. I've never had a bother with MOT at all with mine, but I usually have it done at my local LR Indy garage so they know their ****

If you're anywhere near Garstang then I can recommend Claughton Services, they do all my bits and are 100% reliable and not expensive, they are very busy though so you have to wait to get stuff done - but I've never had anything need doing twice there, they really know what they're at with Land Rover motors

brianp38dse · Aug 21, 2014

my tester goes for a drive to check brakes, light goes out then never had any problems it does seam to vary from tester to tester

StuckAgainSteve · Aug 21, 2014

There will be notes on the vosa database. Report the prick to vosa by officially challenging the fail.

SteNova · Aug 21, 2014

Did you supervise the test?

mozz smith · Aug 21, 2014

Rick-the-Pick said:
We could start a whole new thread on characteristics of the MOT tester.
One of my old 2 door V8 classics got failed on the gearstick being wobbly, & the car tested before mine passed with a horizontal crack straight through the middle of the windscreen.

rick who was wobbly ??? had u been drinkin !!!!!!

and did your glasses have a horizontal crack through the middle ??????

I fink this threads gonna go worse

I thought it was my eyesight that was bad , , cheers mozz

wammers · Aug 21, 2014

By the way ABS lamp should extinguish at 7 Km/h (5 MPH). Not 7 MPH.

mozz smith · Aug 21, 2014

you tell em wammy , welcome home by the way ,,, p.s. the feckin card never arrived !!!!! so I suppose my pressie wasn't sent either ......mozz

wammers · Aug 21, 2014

mozz smith said:
you tell em wammy , welcome home by the way ,,, p.s. the feckin card never arrived !!!!! so I suppose my pressie wasn't sent either ......mozz

Got you an ice cream but it melted on the airport.

tomcat59alan · Aug 21, 2014

mozz smith said:
you tell em wammy , welcome home by the way ,,, p.s. the feckin card never arrived !!!!! so I suppose my pressie wasn't sent either ......mozz

The pressie is with the card, next to mine, still in Spain.

New Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

No longer with us, RIP

Active Member

New Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

No longer with us, RIP

Well-Known Member

No longer with us, RIP

Well-Known Member

Similar threads