gordonontop
New Member
Does a modification exist that will stop the ABS and Traction Control warning lights staying lit on my 2008 LandyDoes a modification exist that will stop the ABS and Traction Control warning lights staying lit on my 2008 Landynotenoughtime
Active Member
As said get it plugged in first to find what the problem is, no point masking a problem will cost you much more later on!
hughdavies
Well-Known Member
It will be a MOT fail, if you do not fix it rather than hide it. What Landy is it??
SteDisco
Active Member
Certainly is, T/C light doesn't matter but ABS light must illuminate then go out. Get it fixed!
Drummer87
Active Member
Yeah when I got my D2 had all three amigos lit up. Even though both front hubs had been replaced and the fault was pointing to the front.
Long story short and money. The harness that connected the hub wire to ecu loom the female connectors were slack so pushed them together, tighter fit and fixed the issue. Guess the vibration caused it to trip after being reset a few times. Now happy days.
But like said get it fixed and hooked to a machine could be inexpensive fix
Long story short and money. The harness that connected the hub wire to ecu loom the female connectors were slack so pushed them together, tighter fit and fixed the issue. Guess the vibration caused it to trip after being reset a few times. Now happy days.
But like said get it fixed and hooked to a machine could be inexpensive fix
hughdavies
Well-Known Member
His "landy" is a 2008, so its a D3/D4 totaly different to the D2
gordonontop
New Member
Hi All,
Thanks for the replies, turns out its connectors put halfway down the chassis just where all the mud and **** can hit them! Well done Landrover for clever design!!!!
Thanks for the replies, turns out its connectors put halfway down the chassis just where all the mud and **** can hit them! Well done Landrover for clever design!!!!
easye1
Banned
good old landrover eh, a company thats like a mongral dog, not knowing just what year the father was....:clap2:
