fishlander

Active Member

• Apr 28, 2013

• #1

I need some inspiration!!,as I want to do some mods to my Hippo.So can any of you guys please put some pic's up of your modded hippos.Also it will show the Tractor boys a thing or two!!!

Thanks in advance.

 

Last edited: Apr 28, 2013

DuncanS

Active Member

• Apr 28, 2013

• #2

Thats the latest photos I have, although the side 72W battens are now in and lift kit in the works. The rear now has a pull out shelf which has been vinyl'd up in black with the landrover logo.

Custom switch panel made up for the sunglasses holder, as the standard 4 switch one in the drivers knee hole wasnt enough. It now has been properly copex'd up and has a durite map light underslung through the hole.

 

Last edited: Apr 28, 2013

teddywood1

Well-Known Member

• Apr 28, 2013

• #3

if i could put picture on i would i have tried every way but it still will not let me anybody help please

 

fishlander

Active Member

• Apr 28, 2013

• #4

Thanks guys,that looks quite meaty!!!!,I want to put light guards on and A bar but not sure what else yet!!!

 

DuncanS

Active Member

• Apr 28, 2013

• #5

A bars for pre facelift are rare as rocking horse **** with hens teeth inside! They do occasionally appear on ebay, but there are a load of facelift bars around.

 

fishlander

Active Member

• Apr 28, 2013

• #6

DuncanS said:

A bars for pre facelift are rare as rocking horse **** with hens teeth inside! They do occasionally appear on ebay, but there are a load of facelift bars around.

Click to expand...

Thanks for that mate,mines an 01 Y plate,so I might have a problem there finding one.Not to mention the cost of it.

 

JC600

Well-Known Member

• Apr 28, 2013

• #7

Mine

Wind deflectors
Front & rear light guards
Aero wiper blades
Union Jack badge
Silicone intercooler & intake hoses
16" alloys with 205/80/16 Yokohama Geolander ATs
OE roof rails
Uprated headlight bulbs
Quad LED side light bulbs
Sony xplod head unit
CB
Antenna mount with ground plane
Stinger antenna
MG ZR gear knob
Side steps removed
Bearmach (H&R) 30mm wheel spacers
Bearmach 2" lift kit
Goodridge extented brake lines
Mantec sump guard
Dog guard
Rear window guard
Land Rover low level roof cross bars
Custom mud flaps
Custom small backbox
False floor with Slide out cooker shelf & D rings
12v socket in load space
LED strip light in place of rear loadspace light
Bearmach rock sliderz
Rear work light
Green cotton replacement filter
EBC ultimax heavy duty brake pads
Front projector spot lights
Genuine Land Rover soft A bar
Genuine G4 challenge decals
Race2Recovery stickers
Extended rear diff breather
Rear work light















And some dirty ones.

 

fishlander

Active Member

• Apr 28, 2013

• #8

Thanks jc600,is yours a TD4??,if so how did you make the small back box??

 

Dangermike

Active Member

• Apr 28, 2013

• #9

Those are some awesome examples!

Wish the 5 door had an area I could put switches like that!

 

JC600

Well-Known Member

• Apr 28, 2013

• #10

fishlander said:

Thanks jc600,is yours a TD4??,if so how did you make the small back box??

Click to expand...

Yeah, it's a TD4.....got the back box made at a local exhaust place, then painted it black.

 

Winu

Active Member

• Apr 28, 2013

• #11

Some inspiration

205/80/16 tires with 40 mm spirng lift , Safety Devices Roof Rack with 4xHella luminators on front, 2x10W Led side work lights and one 22W Rear work light , Side protection by D.A.P Sliders.

Rear Access ladder by safety Devices

Internal Safety Devices Roll Cage

With 3 point harness

interior

Aux Electrical system, Gauges (Oil temp/press/boost/volts), CB, GPS, milion of switches

Full Mantec underbody Protection

 

Last edited: Apr 28, 2013

DuncanS

Active Member

• Apr 28, 2013

• #12

I knew it wouldn't be long before mr moneybags showed up! That SD cage is looking good matey!

 

fishlander

Active Member

• Apr 28, 2013

• #13

JC600 said:

Yeah, it's a TD4.....got the back box made at a local exhaust place, then painted it black.

Click to expand...

Thanks mate,did it cost much to have it made?This is one mod I have been thinking about for a while,as a guard just seems to lower the clearance even more!!

 

Winu

Active Member

• Apr 28, 2013

• #14

DuncanS said:

That SD cage is looking good matey!

Click to expand...

Thanks

DuncanS said:

mr moneybags showed up!

Click to expand...

LOL:5brofl:

 

fishlander

Active Member

• Apr 28, 2013

• #15

Thanks Winu,have read your thread with great interest and is the only realy modded 5 door I've seen on here so far!!

 

Winu

Active Member

• Apr 28, 2013

• #16

fishlander said:

Thanks Winu,have read your thread with great interest and is the only realy modded 5 door I've seen on here so far!!

Click to expand...

nice to hear , but my thread was killed by admins (attack page report), so there will be no more updates i think

 

JC600

Well-Known Member

• Apr 28, 2013

• #17

fishlander said:

Thanks mate,did it cost much to have it made?This is one mod I have been thinking about for a while,as a guard just seems to lower the clearance even more!!

Click to expand...

Was £40, its mild steel as stainless is more likely to crack when using it offroad......yeah, I had a Mantec exhaust guard for a bit as my old back box got flattened on the bottom lol

 

fishlander

Active Member

• Apr 28, 2013

• #18

Winu said:

nice to hear , but my thread was killed by admins (attack page report), so there will be no more updates i think

Click to expand...

Whats that mean??(sorry)

 

JC600

Well-Known Member

• Apr 28, 2013

• #19

Duncan, have you got some more pics of your roof rack.....looks like it turned out nice.

 

fishlander

Active Member

• Apr 28, 2013

• #20

JC600 said:

Was £40, its mild steel as stainless is more likely to crack when using it offroad......yeah, I had a Mantec exhaust guard for a bit as my old back box got flattened on the bottom lol

Click to expand...

Great stuff thank you,can I ask who made it?