Ttwo

Active Member

• Jun 17, 2015

• #1

Right iv got a 1995 90 and for some strange reason when I go out in it it choses when they want to work ie...they work and when I turn it off and go out again later they don't....I put the indicator on the other day when they didn't want to work I went to the back wires at the rear and just wiggled the loom then gave up...I started it again later ( indicator stork still flicked down ) and they started goig soon as I turned the key SO I CANT BE A LOOSE WIRE AS IT WASNT MOVED FORM NOT WORKING TO WORKING haha stupid thing...ideas anyone?? Btw when they don't work and I flick them on none flash and it don't click like they should but when they work it will click and flash...thanks

 

muckmuck

Active Member

• Jun 17, 2015

• #2

Do they work when you put the hazards on ?

 

hughesy

Well-Known Member

• Jun 17, 2015

• #3

The hazard light switch is a source of a lot of indicator problems.

 

Ttwo

Active Member

• Jun 17, 2015

• #4

Yep they work when the hazards are on..I recently re wired the back lights so I went and checked the earth but that's fine...I'd understand if it worked and stopped while I dove with the bumps etc but when it don't move well..that just get me haha

 

freelance

Well-Known Member

• Jun 17, 2015

• #5

Is the wiring chafed where it enters the chassis

 

Ttwo

Active Member

• Jun 18, 2015

• #6

I haven't looked there I was maybe thinking it's the stem? But the lights flash when I pull it....just don't know where to stay without starting to take it allll apart or any tests I can do to find the problem

 

muckmuck

Active Member

• Jun 18, 2015

• #7

Prob the indicator switch, take the cover off an have a looksie......so if the connectors are worn,dirty,melted or loose....

 

zeaphod

Well-Known Member

• Jun 19, 2015

• #8

My money would be on the hazard switch. When the indicators are not working, pull the hazard switch out and wiggle the wires.

 

Ttwo

Active Member

• Jun 19, 2015

• #9

If I flick the hazard switch the work and it makes that clicking sound...

 

Ttwo

Active Member

• Jun 22, 2015

• #10

3 days strong now there still working lol

 

rasclatMC

Member

• Jun 23, 2015

• #11

I went out in my troublesome little madam today. The indicators switch on but don't flash. The hazards do the same. Any ideas anyone?

 

Ttwo

Active Member

• Jun 23, 2015

• #12

Mine just decided to stay working don't know why

 

Ttwo

Active Member

• Jun 24, 2015

• #13

Didn't last they died haha

 

mrchurchill109

Active Member

• Jun 24, 2015

• #14

TBH if all of the lights are lighting with the stalk flipped and they're not flashing i'd be after the flasher module.

The electronic ones will fail like this - the timer circuit doesn't start so no clicking.

I have also seen the hazard module fail like this - the internal contacts go high-resistance and the voltage is too low to actuate the flasher module. Jumpering out the switch (green/yellow wire to light green wire) will provide full power to the flasher module and might help indicate (pun intended) the source of the problem.

Alan

 

Ttwo

Active Member

• Jul 11, 2015

• #15

Was the hazard switch?! Iv had it changed and they work...I don't think It was that as the hazards would work on the button just the indicators wouldn't ...strange