Gun7354

Gun7354

Well-Known Member
Morning all, I've now begun to weld in my new front sills. Ive removed the neg from the Bty but should i also disconnect the ECU etc? Does it matter if the ECU doesn't have any power for a month or so whilst i repair?

Thanks Rich
 
Gun7354 said:
Morning all, I've now begun to weld in my new front sills. Ive removed the neg from the Bty but should i also disconnect the ECU etc? Does it matter if the ECU doesn't have any power for a month or so whilst i repair?

Thanks Rich
Click to expand...
As long as the battery is disconnected you should be OK. No problem with the ECU's not having power.
 
Keep your return lead as close to your work area as possible. this will reduce the chance of the current finding a better path through electrical items and keep the return tight to the metal. the less resistance the better your results. your material should be as clean as possible as you do not have a flux to break up the oxide and float dirt from the joint
 
tarphenry said:
Keep your return lead as close to your work area as possible. this will reduce the chance of the current finding a better path through electrical items and keep the return tight to the metal. the less resistance the better your results. your material should be as clean as possible as you do not have a flux to break up the oxide and float dirt from the joint
Click to expand...
Clear, sound advice!
 
You must log in or register to reply here.

Similar threads

rover75lover
l 322 air susension
Replies
5
Views
1K
rover75lover
rover75lover
T
Disco 2 Chassis welding advice - near rear trailing arm bracket
Replies
6
Views
2K
frostythor
frostythor
T
P38A P38 DSE Manual (non-EGR) No turbo boost
Replies
7
Views
488
Grrrrrr
Grrrrrr
H
P38A 1997 2.5 cranks dont start
Replies
6
Views
2K
Datatek
Datatek
C
Freelander 2 (LR2) Engine Removal Sequence
Replies
4
Views
2K
pwood999
pwood999