I seriously hate waxoyl at the moment.
Still scraping it off the bodywork in readiness to join the bulkhead and side frames that I dropped off at the spray shop this morning.
Hopefully I can start the bodywork reassembly process in the next few weeks πŸ˜ƒ
16876161663422982172577713634379.jpg


Still got to deal with this little lot

16876162351821390840741967822559.jpg
16876162852863876042325196599080.jpg


On top of that, apparently I've agreed to paint the inside of the house before the end of the month 🀯
 
Bulkhead fitted.
Steering nearly completed
Front foot wells done.
Seat box in.
Just waiting for the rear tub to come back and then the side frames can go on. (Btw, if anyone has any photos showing where the side frames bolt on to the bulkhead/chassis/rear tub I would really appreciate it, as mine were so rotten I am clueless about refitting?
IMG_20230730_143146.jpg
IMG_20230730_143133.jpg
IMG_20230730_143125.jpg
 
I think the green door is a replacement, that said, all of the doors are in a very poor condition. The lower skins are sound but the rest is pretty rotten.

You can take the skins off and remake / replace the frames ...
 
It seems Noel doesn't hate me after all.
Yes, I was made to remove the bulkhead support.
Yes, I had to drill and tap the front stud.
But the awkward ones at the back, I squared up with a grinder, hammered on a small socket and wow! They unwound πŸ˜€

1722453849695747234122905484912.jpg
17224539235696633599613895906387.jpg
 
Another summer passed and still Noel is going nowhere.
Such a busy year.
In July I started to overhaul the snail heater

The heater matrix box was nice and quick
IMG_20240721_182257_HDR.jpg


IMG_20240803_103723_HDR.jpg


The snail however was a pig and my time was required for other things

IMG_20240721_182300_HDR.jpg


IMG-20240823-WA0014.jpeg


But eventually, this afternoon, I finished reassembly!

IMG_20241109_163153_HDR.jpg
 

Attachments

  • IMG_20240803_103723_HDR.jpg
    IMG_20240803_103723_HDR.jpg
    256.3 KB · Views: 17

Similar threads