Raytheman Active Member Jun 18, 2016 #1 i bought two new locks. when I installed them I saw the right door had no hole for the lock. so I used this tool to make one now it looks like this tool off and lock in this is what was left
i bought two new locks. when I installed them I saw the right door had no hole for the lock. so I used this tool to make one now it looks like this tool off and lock in this is what was left
Bobsticle De Villes Advocaat Jun 18, 2016 #2 Looks interesting. Do you need access to both ends when tightening it?
Raytheman Active Member Jun 18, 2016 #3 You need about 2 centimeters on the backside. But you do not need further access. On the first pic you see the 3 sharp points. They dig into the metal. With a spanner only on the front you force out the plate metal.
You need about 2 centimeters on the backside. But you do not need further access. On the first pic you see the 3 sharp points. They dig into the metal. With a spanner only on the front you force out the plate metal.