L

L322 sufferer

Member

• Oct 23, 2019

• #1

Good Afternoon All

Many thanks to Hippo for assisting in the right area to post!

Just joined the community and am seeking guidance on a particular item regarding the M62 cylinder head
Am ready to re-install but the manual states an O ring is required but am at a loss of locating the item through the spares network
Additionally have been informed there could also be a non return valve required?
Vehicle is a 2004 4.4 V8 Vogue
Appreciate any assistance/information in advance

Many Thanks

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Oct 23, 2019

• #2

Which manual are you using?

Which O Ring does it state to replace?

There are O rings on the VANOS control solenoid housing and on the Cam Gear Chain Tensioner....

 

L

L322 sufferer

Member

• Oct 23, 2019

• #3

The LR workshop manual LRL0477 is shows a picture of the head with an O ring to be installed just back from the vanos inlet sprocket

 

Dopey

Well-Known Member

• Oct 23, 2019

• #4

Whats the part number?

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Oct 23, 2019

• #5

This One?

 

L

L322 sufferer

Member

• Oct 23, 2019

• #6

The manual does not give a part number it just says fir a new one!

Have asked British Car Parts and Rimmer Bros but they are at a loss as to the identification of the o ring

 

L

L322 sufferer

Member

• Oct 23, 2019

• #7

Thats the one but is says LH head - is that the LH in the diagram?

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Oct 23, 2019

• #8

L322 sufferer said:

Thats the one but is says LH head - is that the LH in the diagram?

Click to expand...

Yep, thats the LH Head....still trying to find the part number

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Oct 23, 2019

• #9

6800 - Part Number LDO000020
HM1 - Part Number LZV000010

Are these they?

 

L

L322 sufferer

Member

• Oct 23, 2019

• #10

Evening Saint it looks like them but now appears like there is two items?

Is the 6397B a non return valve and the HM1 6800 the O ring?

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Oct 23, 2019

• #11

6397B is a locating dowel....6800 is a non-return/check valve and HM1 is listed down as a spacer....but it could be called an O ring by the Land Rover manual and parts suppliers (and Land Rover themselves) may call it a spacer...

6397B is part number LYU000040

This is 6800....

And this is HM1.....

 

L

L322 sufferer

Member

• Oct 24, 2019

• #12

Morning Saint

Many thanks for your time and effort locating the required part very much appreciated

Additionally thanks to the members welcome messages also

Kind Regards

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Oct 24, 2019

• #13

L322 sufferer said:

Morning Saint

Many thanks for your time and effort locating the required part very much appreciated

Additionally thanks to the members welcome messages also

Kind Regards

Click to expand...

Hope it helps.

 

K

kg74

Member

• Oct 25, 2019

• #14

It is the spacer shown in the last picture Saint posted. It is the exact same on the BMW engine - that is how I sourced mine. You can look the number up of realoem.com - just pick a 2001 X5 with 4.4. I believe this is the part #
11111739185

 

Henry_b

Think outside, no box required.

• Oct 29, 2019

• #15

It's a spacer.