He put them on mine, I don't know how many years ago now, and not had any problems with them, and they are still working fine, I did look on line but didn't have much luck
 
Sorted this issue lads. The previous owner of this beautiful girl should never be allowed near another Land Rover for as long as he lives! So many things have been bodged and the thermostat was no exception. It had been taken out and bent open with a screwdriver for some reason. So that's fixed now and the engine gets up to temperature as expected. Not much left on the list now!
 
Gvmclean said:
Sorted this issue lads. The previous owner of this beautiful girl should never be allowed near another Land Rover for as long as he lives! So many things have been bodged and the thermostat was no exception. It had been taken out and bent open with a screwdriver for some reason. So that's fixed now and the engine gets up to temperature as expected. Not much left on the list now!
Click to expand...
Make sure the viscous fan is good.
 
I might have been a bit rash and whilst the radiator was off to get to the thermostat, I might have taken the viscous fan out and conducted the air con fan mod. I'll find out if that works come spring time. I live in the North of Scotland and so I don't think it'll be an issue.
 
I couldn't find a way to get to the bolts without removing it. I tried loosening it and just pulling it forward an inch or two but I gave up in the end and just lifted it up. Not a big job really, in the end.
 
True better than damaging it with a spanner.
I got pics here somewhere when I opened it expecting no stat in there, takes bout ten minutes with 10mm I believe and 13mm to move the loom across the front ?
 
The securing bolts on the bottom were completely rusted in on mine and so it was more like 30 minutes but, as you say, better then causing accidental damage by trying to sneak in behind it in situ.
 
Gvmclean said:
I might have been a bit rash and whilst the radiator was off to get to the thermostat, I might have taken the viscous fan out and conducted the air con fan mod. I'll find out if that works come spring time. I live in the North of Scotland and so I don't think it'll be an issue.
Click to expand...
Aircon fans mod kept mine cool in 42C last summer:D
 
You must log in or register to reply here.

Similar threads

noblerover
L322 4.4 M62 running fault
Replies
8
Views
674
noblerover
noblerover
K
Is my RR Classic in EAS shutdown?
Replies
12
Views
875
kevleaper
K
OscarBoy
300 Tdi Temperature Gauge not working, maybe?
Replies
8
Views
1K
OscarBoy
OscarBoy
S
Freelander TD4
Replies
1
Views
288
Ian M in France
Ian M in France
G
L322 Air Conditioning (I know I know)
Replies
4
Views
558
Girthy
G