L

lockmj

New Member
I have spoken to a defender tec centre in prague were my 110 200tdi is. they found the problem to be the axle. they said i do not need ot replace the whole axle and that just the joint would be ok. Can any one english help me out. Does this sound correct. they also said i would cost about 300pounds including fitting???
 
lockmj said:
I have spoken to a defender tec centre in prague were my 110 200tdi is. they found the problem to be the axle. they said i do not need ot replace the whole axle and that just the joint would be ok. Can any one english help me out. Does this sound correct. they also said i would cost about 300pounds including fitting???
Click to expand...

might help if you can tell us which joint it is , and the symtoms of the failier ;)
 
steering wouldn't go from one side to the other easily then a grinding noise when going over bumps and sometimes just normal driving. also when the wheel is jackup drivers side and you put it on full lock when you spin it it bounces back?
 
lockmj said:
steering wouldn't go from one side to the other easily then a grinding noise when going over bumps and sometimes just normal driving. also when the wheel is jackup drivers side and you put it on full lock when you spin it it bounces back?
Click to expand...

well sounds like cv joint to me all i can say is the parts must be expensive over there :rolleyes:
 
Sounds like it must be the CV joint, not a very expensive part in itself, but im not sure what the labour costs would be, also would have to replace all the axle lubes.
Lifes cheaper when you can tackle these problems in your drive!
 
unfortunatly i'm on the way to an orphanage in Ukraine with clothing toys and food. i'm full to the brim even the full lengh roof rack is packed. I've been stuck in prague with no money stayig in a hall way of a friend on the floor in my sleeping bag. All good fun though!!! the garage said half axle joint?? no need to replace whole axle now
 
Are they able to break down that price for you? Sounds like they're making a fair old wedge out of the labour charge.... OR... they've never done one before and have massively over-estimated how long it will take!
 
labour is expensive its about j30 an hour and thy said upto 5 hours although should be less including the diagnostic fee for finding the fault.
 
just spoken to the boss how speaks good english he said cv joint and it should cost about 200 euros all in
 
You must log in or register to reply here.

Similar threads

suew
Rear Axle Oil Leak
Replies
6
Views
544
suew
suew
KB159
Lost Keys
Replies
9
Views
908
Car-pet
C
dag019
A question of gearboxes
Replies
16
Views
924
Skolmate
Skolmate
T
Power steering pump NTC9070
Replies
0
Views
632
timbr00
T
dag019
Fitting a Husky Winch
Replies
8
Views
569
dag019
dag019