border · Jan 27, 2018

When they don't turn up to help you've got to improvise.

gmne07966 · Jan 27, 2018

fortunately ive got a mini digger very handy for that type of work lol

gmne07966 · Jan 27, 2018

my 300 has been very smokey for a while on tick over changed stem seals as they were a bit stiff still the rich smoke and a burst of smoke when reving so pulled injectors out today and they were friggin rotten got the mr muscle oven cleaner out got rid of the carbon clean as a whistle after that then put them into acetone on the tips for an hour or so put em back in was smokey at first but they must of new sorted themselves out as its burning clean as a whistle didnt take injectors apart and they are sorted removed vith homemade tool that screws onto top of injector with a loop on it to put a sliding hammer through couple of taps on sliding hammer and they are out.

border · Jan 27, 2018

gmne07966 said:
my 300 has been very smokey for a while on tick over changed stem seals as they were a bit stiff still the rich smoke and a burst of smoke when reving so pulled injectors out today and they were friggin rotten got the mr muscle oven cleaner out got rid of the carbon clean as a whistle after that then put them into acetone on the tips for an hour or so put em back in was smokey at first but they must of new sorted themselves out as its burning clean as a whistle didnt take injectors apart and they are sorted removed vith homemade tool that screws onto top of injector with a loop on it to put a sliding hammer through couple of taps on sliding hammer and they are out.

Engines are like Welding to me mate, aint got a clue

Got a friend for those problems.

gmne07966 · Jan 27, 2018

You done the wrong thing getting a landy then pmsl

border · Jan 27, 2018

gmne07966 said:
You done the wrong thing getting a landy then pmsl

Should of gotta skateboard or B M X then instead.
Never mind in at the Deep end I suppose.

gmne07966 · Jan 27, 2018

It's a massive learning curve

border · Jan 27, 2018

OK Back to the technical Bits, Photos of where Outriggers should be, Don't know why he has left them off.
Sorry about picture but it was getting dark.

gmne07966 · Jan 27, 2018

Won't take much to stick a new set on

gmne07966 · Jan 28, 2018

you done owt today with landy,ive been sorting wires for new dash today oh the joys and its still running mint since i sorted injectors out

border · Jan 28, 2018

gmne07966 said:
you done owt today with landy,ive been sorting wires for new dash today oh the joys and its still running mint since i sorted injectors out

Not Yet concentrating on extending my Garden shed come workshop. need to make it bigger then build work benches round it.
I'm in no hurry whatsoever with the project, could take me a year or so.

border · Jan 28, 2018

Couple of better pics of front chassis.

gmne07966 · Jan 28, 2018

Am onto year three with mine so I know what you mean

border · Jan 28, 2018

Hers another bit of advice I need. Gonna try and start engine tomorrow on chassis, from battery , can someone tell me, before I blow myself up, step by step instructions on how to do this?? where to put wires etc.
Cheers

Al2O3 · Jan 28, 2018

border said:
Not Yet concentrating on extending my Garden shed come workshop. need to make it bigger then build work benches round it.
I'm in no hurry whatsoever with the project, could take me a year or so.

If you are not mechanically minded and learning as you are going along I think you'll need to revise your time estimate. Will your shed be big enough for you to get the Landy in, so you can work on it in all weathers?

border · Jan 28, 2018

Al2O3 said:
If you are not mechanically minded and learning as you are going along I think you'll need to revise your time estimate. Will your shed be big enough for you to get the Landy in, so you can work on it in all weathers?

Its in now Mate, just need to make the place bigger, its in and dry so its safe to leave to work on as and when I can, Need to sort decent Generator out too.

Al2O3 · Jan 28, 2018

border said:
Its in now Mate, just need to make the place bigger, its in and dry so its safe to leave to work on as and when I can, Need to sort decent Generator out too.

Fab.
If you're having a look at your engine tomorrow are you retired so you can work on it full time (sorry, not trying to be nosey)

border · Jan 28, 2018

Al2O3 said:
Fab.
If you're having a look at your engine tomorrow are you retired so you can work on it full time (sorry, not trying to be nosey)

No Mate, Gonna try after work, I work 6 days a week only day off is Sunday. Cant wait for light night to come back in.
If your ever down this way your welcome to come and have a look.

Al2O3 · Jan 28, 2018

border said:
No Mate, Gonna try after work, I work 6 days a week only day off is Sunday. Cant wait for light night to come back in.
If your ever down this way your welcome to come and have a look.

Sorry, that rings a bell. I think you've said that in an earlier post

I would be giving the engine a check over before I tried to start it and I wouldn't run it for long.

border · Jan 28, 2018

Al2O3 said:
Sorry, that rings a bell. I think you've said that in an earlier post
I would be giving the engine a check over before I tried to start it and I wouldn't run it for long.

I will have someone with me who knows what their doing first.

Well-Known Member

Attachments

Active Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Attachments

Active Member

Active Member

Well-Known Member

Attachments

Well-Known Member

Attachments

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads