Hi, I recently bought a Wipac kit to swap the side/ tail lights and indicators to LEDs. the side and tail lights were a straight swap and worked well. i swapped the indicators to LED units. and replaced the flasher relay (4 pin) for the one that came in the kit (3 pin). When I used the indicator all four flashed. As the hazard switch, through wich the indicator wiring goes (same as a mini), I replaced the hazard switch and the indicator unit on the steering column. When the indicators was switched on, again all four flashed. The green panel light showing a trailer also was illuminated the whole time.
To cut a long story short i replaced the LED indicator units for new standard bulb type. I replaced the flasher unit and now everything works fine.
Can anyone explain why there is such a problem changing to LEDs
To cut a long story short i replaced the LED indicator units for new standard bulb type. I replaced the flasher unit and now everything works fine.
Can anyone explain why there is such a problem changing to LEDs