Maxlondon · Jun 23, 2016

Disco1BFG said:
Oh **** .

yep... exactly

Turboman · Jun 23, 2016

Maxlondon said:
no didn't, forgot about that, what is the exact gap , 0.2mm isn't it ? or 0.25mm ?

0.2 on a Tdi.

Maxlondon · Jun 25, 2016

Hi guys,

just done a compression test , I have 350psi in cylinder 3 and 4 and 250psi in 1 and 2

Maxlondon · Jun 26, 2016

Another thing , it smokes a lot less after warming up and when warm and pressing the accelerator all the way down does not smoke at all

Magicgrotto · Jun 26, 2016

Morning Max
Think you need to give IT a good run 5/10 miles should get rid of any water /condensation out of the exhaust system !

Steve

Maxlondon · Jun 26, 2016

Magicgrotto said:
Morning Max
Think you need to give IT a good run 5/10 miles should get rid of any water /condensation out of the exhaust system !

Steve

Hi Steve, I did yesterday, over an hour , still smoking exactly the same this morning

Magicgrotto · Jun 26, 2016

Yes but don't forget that it will have pulled some moisture back in to the exhaust over night !

Steve

Turboman · Jun 28, 2016

Maxlondon said:
Hi guys,

just done a compression test , I have 350psi in cylinder 3 and 4 and 250psi in 1 and 2

I dont know offhand what it should be, but the cylinders should be much closer together than that.

Are you still checking the oil and water levels after driving it?

Maxlondon · Jun 28, 2016

Turboman said:
I dont know offhand what it should be, but the cylinders should be much closer together than that.

Are you still checking the oil and water levels after driving it?

Hi,
no, I don't drive it , I will recheck the valves this week and I think take the head off again this week end , clean everything well and send you guys a picture

Maxlondon

Active Member

Turboman

Mab An Gov

Maxlondon

Active Member

Maxlondon

Active Member

Magicgrotto

Well-Known Member

Maxlondon

Active Member

Magicgrotto

Well-Known Member

Turboman

Mab An Gov

Maxlondon

Active Member

Similar threads