PaulWilde said:
Engine strip today @ 7pm
Click to expand...

Awesome that's tonight's entertainment sorted, looking forward to it :D :pop2:

Btw I can get started on those T-shirt logos soon if we still need them, have had a mega-busy week and not been able to get on the PC much! :(
 
Haha...it was a good laugh last night!

Definitely tuning in to tonights as well.

Are we taking bets on how many times Paul loses the socket/ratchet or burns himself? Haha
 
hehe still got some cakes left anorl ;)

Wont be much to see tonight i'm afraid as i'll be underneath for abit though :D :D
 
is this the engine in your 90 that you want to fit 200TDI parts to ,as the rear fly wheel housing is different and has large gasket between it and block as well as front assembly ,have you thought about oil feed for head ,head bolts and piston will need measuring to check they have 1-2 thou diametrical clearance at bottom of skirt,all pistons and blocks vary in size even when new and every thing been standard ,i presume you will gap rings as well,if you need i can give you data
 
forgot to mention on 2.5 red block there is small metal plug blocking oil way drivers side front 200s use thi as head oil feed
 
jamesmartin said:
is this the engine in your 90 that you want to fit 200TDI parts to ,as the rear fly wheel housing is different and has large gasket between it and block as well as front assembly ,have you thought about oil feed for head ,head bolts and piston will need measuring to check they have 1-2 thou diametrical clearance at bottom of skirt,all pistons and blocks vary in size even when new and every thing been standard ,i presume you will gap rings as well,if you need i can give you data
Click to expand...

jamesmartin said:
forgot to mention on 2.5 red block there is small metal plug blocking oil way drivers side front 200s use thi as head oil feed
Click to expand...

Thanks for the information there, this is all new to me, so the more info the better :)
 
Big end caps dropping on your head = pain

Paul1.jpg






Eating on the job - food for thought


paul3.jpg



Other half bringing it all out for you - priceless :)


Paul2.jpg





:D
 
haha nice one :D

Sorry ya missed it lrjack, but was having trouble with feed tonight, going to stick a permanent cable in tomorrow so hopefully it'll eliminate further issues

Cheers
 
You must log in or register to reply here.

Similar threads

L
Landy 110 1992 (J368 XSG) - is it as bad as mechanic says..
2 3
Replies
44
Views
4K
tottot
tottot
Mack1
New to landy zone
Replies
6
Views
743
brianp38dse
brianp38dse
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
394
xDParis64
xDParis64
Blob
L322 Could somebody compare their CANBUS to mine on GapIID please?
Replies
1
Views
545
marjon
marjon
styleruk
2.25 petrol rough idle
2 3 4
Replies
60
Views
2K
styleruk
styleruk