Tonight from 8ish i'll be stripping out the waterpump to check the impeller after last night's findings.

Cheers
 
Mate, not sure if you'll see this post, but your Landy Cam has frozen. Some of the other guys are taking the **** out of you. Obviously I'm not !!!!
 
Daz said:
Mate, not sure if you'll see this post, but your Landy Cam has frozen. Some of the other guys are taking the **** out of you. Obviously I'm not !!!!
Click to expand...

as if we would take the ****.......


well amybe CharlesY ;)
 
they should be set precisely, wrongly set will alter injection timing 125 bar they would open too early but if your not careful you will burn a piston, injector pressure and pattern is critical
 
Missed most of it but i'm here for 8 hours now..can you nip out and do it again please?
 
all , a good used injector will open at correct pressure ,if its worn its ****ed, less pressure will open too early ,same injector 2.25/2.5na/2.5td,no point in cleaning them usually makes them worse we found only thing worthwhile was fitting new nozzel and resetting
 
You must log in or register to reply here.

Similar threads

L
Landy 110 1992 (J368 XSG) - is it as bad as mechanic says..
2 3
Replies
44
Views
3K
tottot
tottot
Mack1
New to landy zone
Replies
6
Views
635
brianp38dse
brianp38dse
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
309
xDParis64
xDParis64
Blob
L322 Could somebody compare their CANBUS to mine on GapIID please?
Replies
1
Views
519
marjon
marjon
styleruk
2.25 petrol rough idle
2 3
Replies
44
Views
1K
styleruk
styleruk