if its as it should be 11mm or 7/16 would be more usefulI had a very important part to play in today's work............ I got sent to halfords for two 10mm spanners
Without which, the whole project would have stoppedI had a very important part to play in today's work............ I got sent to halfords for two 10mm spanners
Of the sixteen or so bolts holding in the radiator panel , some were 11mm, some were 7/16, some were 10mm and one was half inch -, and lots had different sizes on each end . The new imperial spanner set the kids got him for his birthday was only partially useful today . Think the term is that it was a right buggers muddleif its as it should be 11mm or 7/16 would be more useful
That's British engineering for youOf the sixteen or so bolts holding in the radiator panel , some were 11mm, some were 7/16, some were 10mm and one was half inch -, and lots had different sizes on each end . The new imperial spanner set the kids got him for his birthday was only partially useful today . Think the term is that it was a right buggers muddle
And you made coffee - and roast chicken dinner!I had a very important part to play in today's work............ I got sent to halfords for two 10mm spanners
And the battery was held in by a length of old seat belt!That's British engineering for you
Thanks James! I'll clean some more crap off tomorrow!yes there should be ,512237 is its number
those numbers dont mean anything useful, number are either on rhs rear of box top or along the t/box top front edge