D

delisle

New Member
Guy
Just replaced my old tired sidelight builds with some nice White LED bulbs. Looks good but now have check front light error on display! Lights working fine but have warning. Am I ok to use the car with this warning or will it through up another fault or just ignore?
Cheers
Rob
 
Because filament bulbs draw more current, the cars diagnostics get confused when the LED lights are fitted. They draw much less current, and have a different resistance. I thinbk it can be cured by wiring a resistor in, in parallel, or somethin....
 
Ok looked and found some with resistors built in so might get them. Am I causing more problems not changing them back or could i drive forever with the lamp warning up an have no problems from that?
 
I got some white led bulbs for mine with resistors built in. Had them a few months now and no warning or error shown and look great.
 
Mick
I got in mine thismorning and had no faults with bulbs. Weird. But if you search eBay for 501 LED bulbs canbus you will find a load. Canbus is the system that will ping up a bulb fault.
Rob
 
delisle said:
Mick
I got in mine thismorning and had no faults with bulbs. Weird. But if you search eBay for 501 LED bulbs canbus you will find a load. Canbus is the system that will ping up a bulb fault.
Rob
Click to expand...

so simple never even thought of doing an ebay canbus LED bulb search!!
thanks Rob!:)
 
You must log in or register to reply here.

Similar threads

B
L322 Reservoir Valve.
Replies
8
Views
722
marjon
marjon
J
Brake lights
Replies
4
Views
496
300bhp/ton
300bhp/ton
O
03 L322 EAS ECU Can bus fault / ABS temp system deactivation
Replies
1
Views
458
oldradiotech
O
C
Warning Light for WIPAC indicator module not lighting up.
Replies
1
Views
398
miktdish
miktdish
B
Range Rover Sport 2009 HSE Diesel Auto
Replies
3
Views
674
skullbiker
S