I guess so. If the pipe is flexible, clamping either side of the cut with some clamps (before you cut!) might help. A couple of small jubilee clips would be a sensible addition, to make sure the pipes don't come off.
 
Hi all,

In terms of security for my 110, 200Tdi, 1992, I currently have:


  1. Immobiliser starter cut-off, complete with red LED, fitted for £14 by my local mechanics. I'm not happy with it because they've placed the large cut-off switch right next to the LED (all positioned like one happy family above the lighter and rear washer controls.) When I pointed this out my mechanic said "put a rag over the switch then." He's a nice guy, but I do despair sometimes.
  2. Disklok attached to steering wheel.
  3. Reclaimed car clamp around rear wheel - should prevent/slow down towing/dragging.
  4. Bad smell - origin unknown.
The current immobiliser is too obvious, so I dreamt (perhaps stupidly) of splicing in a waterproof, push button cut-off to the live feed under the vehicle, right after the thick red wire leaves the battery box.


A few queries regarding this:

  1. Is it possible to have a live cut-off button or would I need to do something with the negative as well?
  2. What type of switch would I need?
  3. Can anyone point me to a switch online?
  4. Is this a good idea? I'm not concerned about whether someone finds it or not, or that I'll have to kneel on the floor each time I want to immobilise the vehicle, I'm only concerned about whether this approach is achievable, technically speaking, and without having any negative effects on the electrics.
  5. Are all babies made in Landy's?
Here's a crude diagram I put together that demonstrates what I'm envisioning:


cut_off.png




Thanks for taking the time to read through this.


anybody know where i can get a switch to put here that works on a remote key fob? I don't leave my car for long and this would be ideal to slow them down..i might even catch one while he's scrating his head?

cheers
 
Can't see why you couldn't achieve the above using a high powered relay, small battery pack and IR key fob. Try maplins, auto wiring products etc. Can't see it costing too much either?
 
Just to add confusion, you can put a line lock in your clutch hydraulics that's stops it being driven even if they can start it:)
 

Similar threads