If it's a range rover chassis it will have been shortened in the middle you should see ware it's been welded.

Post some pics and you'll find what you have.
 
What does the v5 say?

make Land Rover
Model Blank
Suspension type Blank
date first reg 01 11 1975 (decl/d manuf 1964)
wheelplan 2-axle-rigid body
revenue weight 1520.0 kg unladen
Taxation class historic vehicle
fuel heavy oil
cylinder capacity 2495 cc
c02 blank
no of seats blank
 
Well it can't be a real range as they didn't start till 1970
And a declared mfg is usually ex mil or import
 
hi, thanks for all the feedback

more info below, its a little dark at the moment for pic's but will post asap

engine 300tdi
gearbox lt77
suspension coil sprung

stick the pics on tomorrow, but from what you say it sounds like a 90 and someone has stuck on a series reg. it's dodgy, it could even have been stolen.
 
24106540AI
"SHOULD" be....


241Model: Land Rover, Series IIA
Body type: Basic or Station wagon
Wheel base: 88in
Engine: petrol
Model years: 1962-1971
Destination: Home market, right-hand drive (RHD)
06540Serial numberA
Design: Unmodified
Suffix used on SIIA from October 1961 till March 1963, and on SIII from 1971 till 1973

So IF it's on a shortened or extensively modified chassis... Then you could be on a sticky wicket...
 
scrape the driverside dumbiron and you might find a number, if so post it

Chassnumberfront.jpg


come on with the pics ;)
 
i have posted some pics on my user account sorry had problems posting them on this thread

Sorry mate but that screams "ringer" not a single bit of that landy is from a series.

scrape the driverside dumbiron and you might find a number, if so post it

Chassnumberfront.jpg


come on with the pics ;)


Do this^^^^^ and post the number on here.


I'll post the pics on this thread for you.
 

Similar threads