m0ntt

New Member
the interior light is not coming on when doors are open.
1998 2 ltr d 5door.
dash light for doors open works ok
help
ps
lights work onlight switch.
yours Richard
ihave down graded from a disco 300 tdi:mad::mad:
love freelander very good of road:):)
 
Just an idea: take out the housing, you see see corrosion between the plug and where it attaches direct to the circuit board. A quick clean up was what mine required.
 
the interior light is not coming on when doors are open.
1998 2 ltr d 5door.
dash light for doors open works ok
help
ps
lights work onlight switch.
yours Richard
ihave up graded from a disco 300 tdi:):);)
love freelander very good of road:):)

Corrected for you :p:)
 
Probably a bad connection at the light fitting.
It uses two different earth paths, one through the switch, which is ok, the other is switched by the CCU.
 
A very big thankyou for your replies,
i will check out the erths,
i am dislexick.
i tryed the green lane at kidstones above Buckden, got to the high point
& played ham radio, made a latae coffy,got afew contacts on 2mtrs & returned Skipton, well pleased with freelander.
yours Richard;):)
 
Just an idea: take out the housing, you see see corrosion between the plug and where it attaches direct to the circuit board. A quick clean up was what mine required.

I had this problem constantly - on my '02 TD4 the roof light has a PCB on the back of it and the wires plug on. The plug would corrode in no time so I soldered the wires to the PCB. No problems now....

Is the problem car a 5 door or 3 door? I think they have different lights.
 
Hi it is a 5 door, had a look at the board, cleaned conector on board, i think damp has come in though roof arial fiting, will seal with silican.
changed dif oil with sringe & tube, it was black. next frunt dif.
yours Richard
thank you for all your help.
The best forum i have been on:):):)
 
Freelanders do not have a front diff as such it is the ird and before you undo the plug to let the oil out make sure you can undo the refill plug ,use a flat sided socket to do it a multi sided can round the refill plug
 

Similar threads