L

Landy425

New Member
Hi all,

New to Landrover and purchased my first which is a 2004 Range Rover 4.4 V8. My instrument cluster is pixelated so i bought a replacement which was cheaper than repair (matching numbers). When i slaves the new one in, i have ABS light, Engine light and one other as well as air suspension error displayed.

Can i actually swap these or should i get my old one repaired? Do i need the new one mapping to my car?

Cheers
 
You cn swap them over and not have any 'issues' but the instrument pack contains vehicle specific information and the proper way is to read the old cluster to diagnostics, then after installing the replacement, have this date read back the new one.

You may also find you have the tamper dot in the trip mileage window, this indicates that the instrument pack is different to the orginal.

If you removed the battery to replace the instrument pack ,then you will have to do a lock to lock reset of the steering angle sensor and this may clear the ABS/HDC/DSC/EAS fault warnings.
 
Saint.V8 said:
You cn swap them over and not have any 'issues' but the instrument pack contains vehicle specific information and the proper way is to read the old cluster to diagnostics, then after installing the replacement, have this date read back the new one.

You may also find you have the tamper dot in the trip mileage window, this indicates that the instrument pack is different to the orginal.

If you removed the battery to replace the instrument pack ,then you will have to do a lock to lock reset of the steering angle sensor and this may clear the ABS/HDC/DSC/EAS fault warnings.
Click to expand...

Thanks for that.

Being new to this, im guessing ill need to take it to a landy specialist to swap it using diagnostics?

I have the dash in bits so its just the plug in i would need im guessing then i would rebuild

Thanks again
 
What Range rover have you got? If it's a sport, the binnacle cannot be replaced unless you replace the Engine ecu, ABS ecu, Suspension ecu.

I've done it many times.
 
The Binnacle on a L322 is the main hub ecu.

I pretty sure you need to swap out the other ECU's from the same vehicle, but you will be changing the identity.
 
Rick-the-Pick said:
What Range rover have you got? If it's a sport, the binnacle cannot be replaced unless you replace the Engine ecu, ABS ecu, Suspension ecu.

I've done it many times.
Click to expand...
Hello Rick, I wondered if you could be kind enough to help me please... We have a 2008 TDV8 HST Sport, the cluster was using the hazards to flash and immobiliser non start on occasions, we sent the cluster off to a company to repair and when it cam back the vehicle has immobilised all the time and they had also buggered up the display with half the pixels missing, sent if off to them again and this time display good but still immobiliser light flashing/ non start... I've bought an eco/ lock set and key from eBay and we fitted it all yesterday but immobiliser light flashes and no start!.. also no central locking now, I wondered if we are missing something or needs to be programmed, we have autel elite diagnostics for what that worth, should it all be plug and and drive or am I dreaming :)
 
Good evening Rick my names Kim and I have an issue with my landy 2 Td5 1999 .today I've got in and gone to start engine and as soon as I turn the key My alarm goes off .Shuts off with the Fob ..locks and unlocks with fob .Just the engine start up .Doesn't start .I've googled possible reasons and am coming up with Immobiliser. OR a BCU ..unit .Please help and possibly advise ..I really don't want to lose him lol..Owned now for 17 of his 25 years lol
Thank you
Ps
I get great compliments on how good it does look for its age .
 
Brogan62 said:
Good evening Rick my names Kim and I have an issue with my landy 2 Td5 1999 .today I've got in and gone to start engine and as soon as I turn the key My alarm goes off .Shuts off with the Fob ..locks and unlocks with fob .Just the engine start up .Doesn't start .I've googled possible reasons and am coming up with Immobiliser. OR a BCU ..unit .Please help and possibly advise ..I really don't want to lose him lol..Owned now for 17 of his 25 years lol
Thank you
Ps
I get great compliments on how good it does look for its age .
Click to expand...
If that is a Disco 2, you are in the wrong section, I suggest you re post in the Discovery section.
 
Brogan62 said:
Good evening Rick my names Kim and I have an issue with my landy 2 Td5 1999 .today I've got in and gone to start engine and as soon as I turn the key My alarm goes off .Shuts off with the Fob ..locks and unlocks with fob .Just the engine start up .Doesn't start .I've googled possible reasons and am coming up with Immobiliser. OR a BCU ..unit .Please help and possibly advise ..I really don't want to lose him lol..Owned now for 17 of his 25 years lol
Thank you
Ps
I get great compliments on how good it does look for its age .
Click to expand...

Datatek said:
If that is a Disco 2, you are in the wrong section, I suggest you re post in the Discovery section.
Click to expand...
Oops so sorry Thank you for letting me know ..New to this .Have a good day
Kim
 
Have used ecutesting.com for original instrument cluster repair. When it comes back its plug and play all coded ready to go, and lifetime guarantee,
 
You must log in or register to reply here.

Similar threads

D
Instrument cluster...
Replies
2
Views
400
lynall
L
T
L322 no illumination on instrument cluster
Replies
14
Views
2K
gstuart
gstuart
The Wombat
Discovery Td5 Instrument cluster config or programming
Replies
5
Views
632
sierrafery
sierrafery
Thewilbury
L322 Instrument Cluster Query
Replies
13
Views
3K
awkwardbob
awkwardbob
O
03 L322 EAS ECU Can bus fault / ABS temp system deactivation
Replies
1
Views
622
oldradiotech
O