johnnysensi
Active Member
Is there a injector seal/washer on the BMW 2.5 p38 engine...if so ..Anyone got part number /would halfrauds sell em??
Yes there is what is your problem? Bosch diesel specialists should have them. I doubt if Halfrauds will. If you have diesel leaking it will not be caused by that item.
johnnysensi
Active Member
Burnt black diesel at Base of injector on 2 injectors..could be drip off pipes
Will be spill pipes. Only thing you will get coming past injector seal is combustion gas not diesel.
johnnysensi
Active Member
Right halfrauds here we go
tomcat59alan
Well-Known Member
Wammers is correct, if you have a problem with the sealing washers DON'T buy new unless they are buggered. They are copper and can be annealed by heating them to cherry red and dropped into cold water.
The body had split from the internals or something similar (I regret not asking for more information but I was in a rush to rebuild it). The other 5 could be fully rebuilt, but too much plastic in No4 to prevent it.
Ah. That'll be why he had to bin it. Thanks for the info.
Jake Hewitt
Active Member
Good evening Wammers, I have bubbling black diesel when running at the base of number 1 (closest to front bumper). Definitely spill pipe or should I grab a couple of washers anyway?
Spill pipe, liquid fuel cannot leak out of the cylinder.
Jake Hewitt
Active Member
The black fabric type tubing? Any idea where can I grab some replacement pipe? Think it's already been cut, no slack at all.
Wammers is correct, if you have a problem with the sealing washers DON'T buy new unless they are buggered. They are copper and can be annealed by heating them to cherry red and dropped into cold water.
@Jake Hewitt !
But if they're cheap enough ...
