M

Mash

New Member

• Dec 7, 2013

• #1

Hi All..Think I may have made a bit of a cock-up..
I had to remove the IP on my 200tdi and did not lock the pump with the bold on the side..
The old girl now smokes like a trooper and has no power..How can I reset up the pump ?
Cheers

 

L

landromy

Member

• Dec 8, 2013

• #2

Im so curious to see what people say about this because I did the same thing...Only I decided it was time to change the timing belt and did not lock in the pin.....Not sure what to do

 

F

ferretboy

Active Member

• Dec 10, 2013

• #3

It's simple just line up the hole in the pump drive flange slide a 9 mm drill bit in ! Make sure it's in the hole properly ! The location of the hole is at 12o clock ! Line up crankshaft and camshaft put belt on tension up and turn engine over a full turn ! Just make sure you have the marks all lined up !!