L

Landy1978

New Member

• Nov 7, 2022

• #1

Hi. No indicators. Hazards good (all bulbs good) earth cleaned (bull head and earth from battery), indicator stalk replaced, hazard switch replaced , fuses replaced..
Changed rear right indicator unit and blew the fuse. Since no indicators..

please help…

 

JUKE179r

Well-Known Member

• Nov 7, 2022

• #2

Er, uh, which 1978 Landy do you own?
BTW, Welcome to the forum.

 

L

Landy1978

New Member

• Nov 7, 2022

• #3

JUKE179r said:

Er, uh, which 1978 Landy do you own?
BTW, Welcome to the forum.

Click to expand...

Thanks! That would be useful.. It’s a 200tdi 1993

 

Disco1BFG

Well-Known Member

Full Member

• Nov 7, 2022

• #4

Ok, so 90, 110, D1 or RRC ?

And Welcome

And .... It's an earth fault ... always is..

 

L

Landy1978

New Member

• Nov 7, 2022

• #5

Disco1BFG said:

Ok, so 90, 110, D1 or RRC ?

And Welcome

And .... It's an earth fault ... always is..

Click to expand...

Ha! Thought so but where .. I have a 90..

 

H

Hicap phill

Well-Known Member

• Nov 7, 2022

• #6

Welcome
Have you replaced these with bulbs or leds?
Thanks

 

L

Landy1978

New Member

• Nov 7, 2022

• #7

Hicap phill said:

Welcome
Have you replaced these with bulbs or leds?
Thanks

Click to expand...

Thanks for welcome.. Bulbs..

 

L

Landy1978

New Member

• Nov 7, 2022

• #8

I’ve cleaned up the Earth attached to the bulkhead and cleaned up the battery Earth. Is there another specific Earth related to the indicators? Thanks all for the input, very appreciated.

 

landowner

Pensioner Pete

Full Member

• Nov 7, 2022

• #9

If you have used the hazard switch then that sometimes causes an indicator fault, same on classic Minis as well
Flick the hazard switch on and off quickly for a while and it might sort things

 

Disco1BFG

Well-Known Member

Full Member

• Nov 7, 2022

• #10

Landy1978 said:

Is there another specific Earth related to the indicators?

Click to expand...

Easiest way to find earth faults is to make a wander lead long enough to get from the battery -ve terminal to everywhere else on the vehicle ... after testing same with a headlamp bulb - to prove it can supply ~5A, you then have a known good earth you can take with you on your search...

Have you tested the flasher unit ?

Also, as post #9 - the prince of darkness' offerings in the switch department are well known as somewhat suspect, so worth checking the switch underload too..

 

H

Hicap phill

Well-Known Member

• Nov 7, 2022

• #11

Take them off & connect direct to 12v to make sure they work. Once confirmed re fit & test using a long 12v lead.
Some of the lights have an earth tag that needs screwing into the body work.

 

brianp38dse

Well-Known Member

• Nov 8, 2022

• #12

Hello and welcome

 

L

Landy1978

New Member

• Nov 12, 2022

• #13

Changed the hazard switch for second time and solved it!! What’s with the switches!? Taken one apart but not an obvious issue?? After market so maybe luck of the draw? Thanks all…