Landy1978

New Member
Hi. No indicators. Hazards good (all bulbs good) earth cleaned (bull head and earth from battery), indicator stalk replaced, hazard switch replaced , fuses replaced..
Changed rear right indicator unit and blew the fuse. Since no indicators..

please help…
 
I’ve cleaned up the Earth attached to the bulkhead and cleaned up the battery Earth. Is there another specific Earth related to the indicators? Thanks all for the input, very appreciated.
 
If you have used the hazard switch then that sometimes causes an indicator fault, same on classic Minis as well
Flick the hazard switch on and off quickly for a while and it might sort things
 
Is there another specific Earth related to the indicators?

Easiest way to find earth faults is to make a wander lead long enough to get from the battery -ve terminal to everywhere else on the vehicle ... after testing same with a headlamp bulb - to prove it can supply ~5A, you then have a known good earth you can take with you on your search... :)

Have you tested the flasher unit ?

Also, as post #9 - the prince of darkness' offerings in the switch department are well known as somewhat suspect, so worth checking the switch underload too..
 
Take them off & connect direct to 12v to make sure they work. Once confirmed re fit & test using a long 12v lead.
Some of the lights have an earth tag that needs screwing into the body work.
 
Changed the hazard switch for second time and solved it!! What’s with the switches!? Taken one apart but not an obvious issue?? After market so maybe luck of the draw? Thanks all…
 

Similar threads