caligarinet
New Member
Is there anyway of identfying what hubs I need??
Tried two so far, first one seemed to have 3/8 bolts...mine has M10.
Second one the space between the bearings is too small, by over an inch.
(ie outer bearing is inset from the threaded portion of the stub axle by about an inch!!!)
Landy is a 1986 Ex-Mod 90. Chassis number SALLDVAC7AA2XXXXX.
Although anyone's guess if this is the original axle or not...
Been having a problem of excessive freeplay in the wheel, which is resolved by changing the bearings, but keeps coming back, so would reckon its either the stub axle or the hub...
Cheers, Paul W.
Tried two so far, first one seemed to have 3/8 bolts...mine has M10.
Second one the space between the bearings is too small, by over an inch.
(ie outer bearing is inset from the threaded portion of the stub axle by about an inch!!!)
Landy is a 1986 Ex-Mod 90. Chassis number SALLDVAC7AA2XXXXX.
Although anyone's guess if this is the original axle or not...
Been having a problem of excessive freeplay in the wheel, which is resolved by changing the bearings, but keeps coming back, so would reckon its either the stub axle or the hub...
Cheers, Paul W.