Now ere's summat.
Drove doon the toon for shopping today in the Pluriel.
Car drove as normal down the mounting and to the market, then on to the dump. Had so little to get rid of I left W in the car with the engine running while I got rid of the bits in various bins.
Got back in and drove out, terrible, raucous noise coming from somewhere, stopped, looked all around the car, nothing draagging on the ground, no flat tyres, nowt. Drove on a bit, same thing, stopped and looked again. Noise was intermittent and seemingly dependant on which way the wheel was turned, as we cornered at one point I thought it was linked to the steering so I put it through lock to lock, but it din't seem to show anything more, or less. Drove to the butcher's drove away again, noise still there.
Went to Leclerc, each bit of these journeys was between half a mile and a coupla miles. Tried pulling on the handbrake to see if it was coming from the rear brakes. It sounded as if a bit of metal or summat was rubbing on a wheel or a brake disc, but that made no difference. TBH the only worse noise I have ever heard like this was when a bit of exhaust came off and dragged along the tarmac.
So, at Leclerc did our shopping, got back to the car loaded it and then I went round it shaking it as vigourously as possible on each corner trying to make it make the noise, to see which corner it was coming from, heard no noise whatsoever.
W going on a bit about it, so I told her if it made it back home I could always get it on the trailer and leave it there to be towed home and fixed there, i.e. in Blighty, as we are only 22 days away from that happening.
Anyway, we started it up and drove out of the carpark, no noise as yet, around a roundabout off towards toon, still no noise, over a sleeping policeman, round another tight roundabout, then off it, still no noise. Long story short, all the way up the mountain, i.e. 44 bends, 3 at least hairpins, and back home. No reptition of the noise at all!!

WT actual Flip!!!!!?????:vb-confused2::vb-confused2::vb-confused2::vb-confused2:

Had I shaken summat loose just like that??;):confused::confused:

I am still going to have a proper look on Sunday as we are busy with a dinner party between now and then, but this is the first time I have given a car a physical piece of my mind, a la Basil FAWLTY, and it has started behaving itself! 🤣 🤣 🤣 🤣


Remember the old trick with the chrome hub caps and a hand full of gravel 😃
 
Morning All. :D
I had a quick measure up of the gas-pipe run the bloke will be replacing on Saturday.
I don't think 12Metres will be enough. :(
I caught the ball of my thumb in the mechanism of the Valve spring compressor a few days ago and now that patch is dying and is becoming sore. :(
Still, there's worse things to have happen. :)
Have a great day! :D
 
Have had a few heavy showers brought the crops on a bit to fast but that's nature 😣
17570725899141209384323.jpg
 
.... OK, I admit it is a disease/fetish. I cannot stop tinkering with the Mini. :D
Today I put a couple more degrees on the timing and yes the burn line on the earth strap moved to be right where I think it should be. I also fiddled with the mixture so I will give it a few more runs and then disassemble a plug to see where the line is on the electrode porcelain (too rich/too-weak/just-right). :D
Tinkering is fun.
 
.... OK, I admit it is a disease/fetish. I cannot stop tinkering with the Mini. :D
Today I put a couple more degrees on the timing and yes the burn line on the earth strap moved to be right where I think it should be. I also fiddled with the mixture so I will give it a few more runs and then disassemble a plug to see where the line is on the electrode porcelain (too rich/too-weak/just-right). :D
Tinkering is fun.
Tinkering Is a lot of fun but driving it is much more fun , don't let it became a obsession 🚗
 
Afternoon folks :).

Sub floor down (well 3 more short bits) then time to lay some floor boards tomorrow. Working 6hrs some of it out in the sun, trimming wood has certainly pooped me out, Made me thristy too:vb-drink:.
They have both been told that Sunday is petrolhead day so no work:p

i thought this retyrement lark meant sitting by the pool drinking Margaritas/beer and BBQs:oops:. Still it keeps me/us in shape.

Looking at buying another house to rent, May ask Angela about tax advice, NOT🤔.

MOTs coming up and the L322s is booked for service. I need to look at the Defender clucth as its not right, so need time to get new fluid through it. Hope its not the fork pushing through:eek:.

Still, muscles and joints moaning at me so I know I am still doing, good?

J
 
.... OK, I admit it is a disease/fetish. I cannot stop tinkering with the Mini. :D
Today I put a couple more degrees on the timing and yes the burn line on the earth strap moved to be right where I think it should be. I also fiddled with the mixture so I will give it a few more runs and then disassemble a plug to see where the line is on the electrode porcelain (too rich/too-weak/just-right). :D
Tinkering is fun.

Tinkering gives you something to do and think about, which keeps the grey cell working in the brain.
Not a bad thing;).

J
 
Tinkering Is a lot of fun but driving it is much more fun , don't let it became a obsession 🚗
No indeed not, but it is only by driving it around that you get to test if your "tinkering" is producing positive results. So it is a good excuse to say "just popping out for 20 minutes to check out what I just altered love, be back soon." There is a method in my madness.
 
Last edited:

Similar threads