Tis a shame you haven't got a known good'un lying around. I can see new tranny costing almost as much as wot you paid for it. Bit of a shame, sympathies Mate.
You are not the only one. At least W tends not to set foot in the garage so I can at least hang onto stuff that otherwise I might have to get rid of.I keep landy bits for ages then decide why hold on to stuff then I get rid & find I need some of them
Always happens..
Or a rather suspect Dolmite Sprint MOD one. (Stored outside with no ATF in for YEARS!)
True! But let's just enjoy the calmness and 'warmth' while we can.
It's no use me pretending to know what it is but it does look nice.I have been freezing my nethers off in my little workshop.
It is tedious making ring-plates 42mm ID 62mm OD out of 3mm sheet steel on a lathe.
Lots of operations for very little progress, but we got there.
This is the result below. A Two Wheel Drive (2WD) unit for a pedal car racer. Itcan have any 10Spd cassette mounted to it and it is compact and pretty lightweight. Those are all the main parts all stacked together and held there by gravity. Some bits get welded together (bottom 3 elements) but the top 2 are bolted to the rest with small M5 bolts locking the upper and lower rings together and fitting in between the teeth of the sprocket you can just see sandwiched between the 2 ring-plates.
I am pleased with how it has come out.
View attachment 330552
Be careful on the roads don't sound good over thereMorning all, the cars packed ready for the off! It's raining here now so I'm glad its an indoor fair
Well that went very well indeed, no Stanage whatsoever.
and did you find the stop cock?Well that went very well indeed, no Stanage whatsoever.
just checked, I could use old fashioned plug in ones wiv an adaptor.
Have a hot toddy and watch tv and snozzMorning all ive got a bit of a cold & snottery which makes me gag n cough yuk, windy n snow here but the fire is blazing.
