WhiskyLassie
Well-Known Member
Good morning folks.
We've just waved the fambly off, W pointed out to me the snow/ice in two plant pots, and it is w!ddling it down today.No Scottish weather can be all at once in a day
With all his children, wives and mistresses....... I didn't know he was that way inclined!!!
I see Dubai and other places in the UAE have been getting some of our British weather.
Not really a fair swop is it?
Not really a fair swop is it?
Thort you was gettin MDF?
Hippo
Lord Hippo
The big sheet eye bort is mdf. That will go on top of me table. Table top is chipboard coated wiv a waterproof surface on top. Metal legs on said table.
Marmaduke
Well-Known Member
Hippo
Lord Hippo
Yer always welcome on ere. Who would we laff at if yer left.
A mate of mine built a kit car, a Jeep based on Range Rover chassis, running gear, engine etc etc.
Looked the dogs furniture, went like stink and of course, didn't rust. Was so great off road that a guy who ran an off-roading centre decided he wanted 3 or 4!
So no issue with it, mate!
Marmaduke
Well-Known Member
He still has it but he only washes and polishes it these daysAr
Are you still driving around in a poor mans Evoque?
WhiskyLassie
Well-Known Member
He doesn't have badly bleached blond hair and Fairfax and favours. What you need as an Evoque driver.Ar
Are you still driving around in a poor mans Evoque?
Me n my mate removed more of the foam from under the floor of the boat, the galley floor/foam is all out thats the easy bit done.
Next part is remove the fuel tank so some wood butchering is on the cards as its quite a big tank, it looks like the foam goes
under the section which the tank sits on so it all needs to go unless I can sharpen a pipe & make a hole all the way through to
the engine bulkhead (so if any water is under the floor it can run to the back and get pumped out via the bilge pump.
Pics to follow once I de-clutter my phone.
Next part is remove the fuel tank so some wood butchering is on the cards as its quite a big tank, it looks like the foam goes
under the section which the tank sits on so it all needs to go unless I can sharpen a pipe & make a hole all the way through to
the engine bulkhead (so if any water is under the floor it can run to the back and get pumped out via the bilge pump.
Pics to follow once I de-clutter my phone.
