Yer cause turning a 6 foot pillar drill upside down & squeezing it into a 3 foot hole wont be easy
Yer cause turning a 6 foot pillar drill upside down & squeezing it into a 3 foot hole wont be easy
You hain't seen the size of my meat balls!!!
Oh aye I do after that comment
mon then.................
Come down here and try them! If you think you're hard enough!!!Oh aye I do after that comment
Come down here and try them! If you think you're gay enough!!!
No sorry makers might be yer man
oooh! Cheeky!!!No sorry makers might be yer man
Mornin peeps.
So, I've got the job, essentially because they think I'm alright (fools).
But..
The money aint fab
It's a forty hour week
I have to get up the infamous A32 every day (and back again).
On the other hand..
I'm starting as a 'knows nuffink' with on the job training which will improve the wage.
It's a proper job, not on the grey. Nobody there looked stressed.
I has a motybike
Going to mull it over while away, but will prolly give it a go.
Happy Friday folks
So, I've got the job, essentially because they think I'm alright (fools).
But..
The money aint fab
It's a forty hour week
I have to get up the infamous A32 every day (and back again).
On the other hand..
I'm starting as a 'knows nuffink' with on the job training which will improve the wage.
It's a proper job, not on the grey. Nobody there looked stressed.
I has a motybike
Going to mull it over while away, but will prolly give it a go.
Happy Friday folks
Hippo
Lord Hippo
Could he pick up a radiator and bag of fittings anorl while he's there?Well... Joiner just arrived and guess what ?
Didn't bring any wood to fit skirting and door frames
He's off to the depot ten miles away to get some , couldn't make it up could you
Hippo
Lord Hippo
He must have changed then engine then. D3 and 4 all have v shape engines in the uk. Can't see that being different for non uk. Or its a D5.Well I don't know exactly what he has in there and he cannot remember the number, a "M something or other" but he says it is a straight 6, a BMW engine and all the people he knows who know about cars, which is a lot, tell him that this is the strong engine, very good, etc etc.
I think it could be an M51 or an M57. But he said it was 3 litre. TBH not all that interested
I'll find out soon enough if i help him with it.
WhiskyLassie
Well-Known Member
I didn't know the full before I commented.
Morning all, happy Friday indeed.
Going to have a weekend of gardening
WhiskyLassie
Well-Known Member
Obviously not that resourceful thenYer cause turning a 6 foot pillar drill upside down & squeezing it into a 3 foot hole wont be easy
No, 'cos that would be intelligent and 'they' don't do that.
As I say, I don't know and he doesn't either! Yet! but he bought it with 150 k on the clock. So maybe the previous owner had a different engine put in. I haven't even looked under the bonnet but the exhaust manifold if it can be seen without removing covers will tell us.
Deffo a D4 or 3 though.
I was just guessing cos I know he works on boats and the types of stainless stuff they have.
Maybe he'll put some pics up.
Make sure you look out your wellies, oilskins and sou'wester for the gardening!
Have a good one!
Ah! So that is why I was fighting off all those wimmins with their awful "proposals". Couldn't walk down the street without tripping over them down on one knee!
Thought it was weird that they all has shoelaces come loose!!
