A question for the older peeps on here.

Apart from going into a room and having to concentrate to remember what the heck I went in there for.

Apart from going upstairs to get something, finding something that needs doing or moving then coming downstairs with nothing or something else, then having to go back up for object A.

Do you also find that, in your later life, doing a DIY job you have done at least once, if not more times before, you take far longer doing it and make more mistakes?

I'm just finishing a slightly trickier version of a thing in our utility room that I did years ago. As the cupboards etc are all new, I have to make the "thing" to match them. It has taken me flipping ages, one false start and yessdi I drilled 6 (very small) holes in the wrong place! (Fortunately now hidden by the bit now being attached in the right place!)

Just wondering!
 
A question for the older peeps on here.

Apart from going into a room and having to concentrate to remember what the heck I went in there for.

Apart from going upstairs to get something, finding something that needs doing or moving then coming downstairs with nothing or something else, then having to go back up for object A.

Do you also find that, in your later life, doing a DIY job you have done at least once, if not more times before, you take far longer doing it and make more mistakes?

I'm just finishing a slightly trickier version of a thing in our utility room that I did years ago. As the cupboards etc are all new, I have to make the "thing" to match them. It has taken me flipping ages, one false start and yessdi I drilled 6 (very small) holes in the wrong place! (Fortunately now hidden by the bit now being attached in the right place!)

Just wondering!

I take longer to do jobs. some can be a benefit ;)
Not got to the forgetting what I was there for...........yet:).

J
 
Just a couple of insulated croc clips, probably buttons in screw fix.

J
Exactly! and I can take big needles and solder them onto bits of wire, I did that ages ago to go with another meter I bought expressly for automotive use, a Gunson thing I think. Just needs me to take push fit connectors and put them in the two main leads and then the other leads connected to the three other types. I used this stuff all the time when making up looms for kit cars. Must dig them out.
 
Oh well the tranny brakes will have to wait, turns out the hub nut is 65mm ive got a 67 its may or may not remove it but
it will damage the nut as these things are solid :confused: I went to the yard to find one & there was a floating caravan stuck under
the pier with some peeps on it. They'd managed to crash into the mooring boat was tied up ??? then ended up stuck.
I towed him out & into the boat hoist, I noticed he'd left his lad about 12 in a dingy struggling to tie it up &
he had no life jacket on so I gave his dad a hard time, told him I didnt want to see them down the pier without a lift jacket again.
Young lad couldnt tie a knot & was wearing a big heavy jacket leaning over the side of a silly wee rubber dingy when the wind
was forcing him away from the pontoon. Anyhoo thats my moan for today. :)

Back oot to put the halfshaft back in. :rolleyes:
 
Oh well the tranny brakes will have to wait, turns out the hub nut is 65mm ive got a 67 its may or may not remove it but
it will damage the nut as these things are solid :confused: I went to the yard to find one & there was a floating caravan stuck under
the pier with some peeps on it. They'd managed to crash into the mooring boat was tied up ??? then ended up stuck.
I towed him out & into the boat hoist, I noticed he'd left his lad about 12 in a dingy struggling to tie it up &
he had no life jacket on so I gave his dad a hard time, told him I didnt want to see them down the pier without a lift jacket again.
Young lad couldnt tie a knot & was wearing a big heavy jacket leaning over the side of a silly wee rubber dingy when the wind
was forcing him away from the pontoon. Anyhoo thats my moan for today. :)

Back oot to put the halfshaft back in. :rolleyes:

Some peeps just don't respect and understand water and its power :( .

J
 
Oh well the tranny brakes will have to wait, turns out the hub nut is 65mm ive got a 67 its may or may not remove it but
it will damage the nut as these things are solid :confused: I went to the yard to find one & there was a floating caravan stuck under
the pier with some peeps on it. They'd managed to crash into the mooring boat was tied up ??? then ended up stuck.
I towed him out & into the boat hoist, I noticed he'd left his lad about 12 in a dingy struggling to tie it up &
he had no life jacket on so I gave his dad a hard time, told him I didnt want to see them down the pier without a lift jacket again.
Young lad couldnt tie a knot & was wearing a big heavy jacket leaning over the side of a silly wee rubber dingy when the wind
was forcing him away from the pontoon. Anyhoo thats my moan for today. :)

Back oot to put the halfshaft back in. :rolleyes:
So you went somewhere to do one thing, did another that you saw needed doing then came away without the thing you went off to get in the first place!
Only difference, you didn't go upstairs to get it!!!

Now you know what I was talking about! 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣
 
Oh well the tranny brakes will have to wait, turns out the hub nut is 65mm ive got a 67 its may or may not remove it but
it will damage the nut as these things are solid :confused: I went to the yard to find one & there was a floating caravan stuck under
the pier with some peeps on it. They'd managed to crash into the mooring boat was tied up ??? then ended up stuck.
I towed him out & into the boat hoist, I noticed he'd left his lad about 12 in a dingy struggling to tie it up &
he had no life jacket on so I gave his dad a hard time, told him I didnt want to see them down the pier without a lift jacket again.
Young lad couldnt tie a knot & was wearing a big heavy jacket leaning over the side of a silly wee rubber dingy when the wind
was forcing him away from the pontoon. Anyhoo thats my moan for today. :)

Back oot to put the halfshaft back in. :rolleyes:
Only joking afore, well done and they were lucky you needed a socket!
What a bunch!
You can see why in Frogland you aren't allowed anywhere on water without certificates sticking out of your earholes!

I imagine the 12 year old doesn't wear shoes with laces!!! Not that I'd tie a dinghy up with a bow!
How long does it take to teach a kid a figure-of-eight, a sheet bend, a bowline, a clove hitch and a round turn and two half-hitches? (Deliberately left the reef knot out, unless the yacht is reeeeely old skool.)
:rolleyes:
 
Only joking afore, well done and they were lucky you needed a socket!
What a bunch!
You can see why in Frogland you aren't allowed anywhere on water without certificates sticking out of your earholes!

I imagine the 12 year old doesn't wear shoes with laces!!! Not that I'd tie a dinghy up with a bow!
How long does it take to teach a kid a figure-of-eight, a sheet bend, a bowline, a clove hitch and a round turn and two half-hitches? (Deliberately left the reef knot out, unless the yacht is reeeeely old skool.)
:rolleyes:
It that were me then basics like that would be required learning before going out.
I'm not a killjoy, but as said, folks don't understand risk anymore.
 
A question for the older peeps on here.

Apart from going into a room and having to concentrate to remember what the heck I went in there for.

Apart from going upstairs to get something, finding something that needs doing or moving then coming downstairs with nothing or something else, then having to go back up for object A.

Do you also find that, in your later life, doing a DIY job you have done at least once, if not more times before, you take far longer doing it and make more mistakes?

I'm just finishing a slightly trickier version of a thing in our utility room that I did years ago. As the cupboards etc are all new, I have to make the "thing" to match them. It has taken me flipping ages, one false start and yessdi I drilled 6 (very small) holes in the wrong place! (Fortunately now hidden by the bit now being attached in the right place!)

Just wondering!
I was going to post a reply to that. But by the time I got to the end of the postings, I forgot what it was :oops:
 

Similar threads