I didn't think you would be posting that pic of me
Morning, tis medical experiments tests today
Good luck! I hope it goes well.Morning, tis medicalexperimentstests today
Well i am about to go running around the land tearing my hair out.
So far this a.m. I have "done" the mod as suggested all over the world of Land Rovers, completed the soldering and then I tested the switches.
Not a fucking thing, on either switch.
To say I am furious is putting it mildly.
So forced to put it all back together with the wires hanging out and meanwhile try to source a new modulator thingy, whil over here but going back to blighty soonish.
I cannot seem to find the YouTube I found the other day which showed how to wire it and then test it. I know I have wired it right and i have tested the wires and the soldering, but no, nowt with both switches up, both down, one up, tother down and vice versa. Nada. i even pierced the wire between them with a needle and connected to that to see if I could get a connection through just one switch but no. It would appear both have gone down at the same time. Which seems mad.
I am worried I am not testing it right, but we need the car tomorrow and rain is forecast for today so I am mightily p!ssed off.
Jeez do I hate car electrics, or at least modern car electrics.
So far this a.m. I have "done" the mod as suggested all over the world of Land Rovers, completed the soldering and then I tested the switches.
Not a fucking thing, on either switch.
To say I am furious is putting it mildly.
So forced to put it all back together with the wires hanging out and meanwhile try to source a new modulator thingy, whil over here but going back to blighty soonish.
I cannot seem to find the YouTube I found the other day which showed how to wire it and then test it. I know I have wired it right and i have tested the wires and the soldering, but no, nowt with both switches up, both down, one up, tother down and vice versa. Nada. i even pierced the wire between them with a needle and connected to that to see if I could get a connection through just one switch but no. It would appear both have gone down at the same time. Which seems mad.
I am worried I am not testing it right, but we need the car tomorrow and rain is forecast for today so I am mightily p!ssed off.
Jeez do I hate car electrics, or at least modern car electrics.
Attachments
If you open your browser and press Ctrl-H is will list all the sites you have visited recently, and (importantly) allow you to enter a search term. This should help you rediscover the previously helpful clip you have already looked at.Well i am about to go running around the land tearing my hair out.
So far this a.m. I have "done" the mod as suggested all over the world of Land Rovers, completed the soldering and then I tested the switches.
Not a fucking thing, on either switch.
To say I am furious is putting it mildly.
So forced to put it all back together with the wires hanging out and meanwhile try to source a new modulator thingy, whil over here but going back to blighty soonish.
I cannot seem to find the YouTube I found the other day which showed how to wire it and then test it. I know I have wired it right and i have tested the wires and the soldering, but no, nowt with both switches up, both down, one up, tother down and vice versa. Nada. i even pierced the wire between them with a needle and connected to that to see if I could get a connection through just one switch but no. It would appear both have gone down at the same time. Which seems mad.
I am worried I am not testing it right, but we need the car tomorrow and rain is forecast for today so I am mightily p!ssed off.
Jeez do I hate car electrics, or at least modern car electrics.
Good Luck!
Well i am about to go running around the land tearing my hair out.
So far this a.m. I have "done" the mod as suggested all over the world of Land Rovers, completed the soldering and then I tested the switches.
Not a fucking thing, on either switch.
To say I am furious is putting it mildly.
So forced to put it all back together with the wires hanging out and meanwhile try to source a new modulator thingy, whil over here but going back to blighty soonish.
I cannot seem to find the YouTube I found the other day which showed how to wire it and then test it. I know I have wired it right and i have tested the wires and the soldering, but no, nowt with both switches up, both down, one up, tother down and vice versa. Nada. i even pierced the wire between them with a needle and connected to that to see if I could get a connection through just one switch but no. It would appear both have gone down at the same time. Which seems mad.
I am worried I am not testing it right, but we need the car tomorrow and rain is forecast for today so I am mightily p!ssed off.
Jeez do I hate car electrics, or at least modern car electrics.
.... that my ER32 collet chuck has just arrived on a very slow boat from China (Ordered 23rd March)
Quality looks fine, problem is that it is Imperial. I am hoping there is enough wiggle-room for it to work with the plentiful and cheap metric sizes used on a small hobby mill.
Quality looks fine, problem is that it is Imperial. I am hoping there is enough wiggle-room for it to work with the plentiful and cheap metric sizes used on a small hobby mill.
I have a metric set but imperial stock and that works close enough for me.... that my ER32 collet chuck has just arrived on a very slow boat from China (Ordered 23rd March)
Quality looks fine, problem is that it is Imperial. I am hoping there is enough wiggle-room for it to work with the plentiful and cheap metric sizes used on a small hobby mill.
I am back from the quacks and I can confirm no TIA just high blood pressure
Good news indeed. More Bisoprolol for you my lad!I am back from the quacks and I can confirm no TIA just high blood pressure
I have never understood what they mean by "High" even unmedicated my average BP was 111/66 @ 71BPM but they put me on the protocol.
I am averaging 148/104 so they are a little concernedGood news indeed. More Bisoprolol for you my lad!
I have never understood what they mean by "High" even unmedicated my average BP was 111/66 @ 71BPM but they put me on the protocol.
also I refuse to take medication so lose weight and be more active is my only way forward.
Well I don't know what TIA is but I'm very glad you don't have it!!!I am back from the quacks and I can confirm no TIA just high blood pressure
It is a mini stroke or bleed in the brain. My father had one and is hereditary apparently!Well I don't know what TIA is but I'm very glad you don't have it!!!
Well I don't know what TIA is but I'm very glad you don't have it!!!
Tinglin in ass?
