So there's an opening for you to join and then become the rep. You could get others to join in too then maybe you'd get some clout. no need to tell em until you've doned it tho.
Pretty sure you have to disclose if you join a union.. would get the sack before i finished the sentence lolSo there's an opening for you to join and then become the rep. You could get others to join in too then maybe you'd get some clout. no need to tell em until you've doned it tho.
No you don't and being dismissed for joining one is discrimination, which you could "do" them for.
http://yourjobrights.co.uk/your-other-rights/your-trade-union-rights/
Ok. They don't give a stuff though, happily pay out a few £££ to get rid of someone they don't like
Such a shame. I worked for a bloke once who got rid off 2 union reps, one for each of the main unions in the place. Cunt.
Best of luck finding another job.
Had my noo karpet fitted today. Transforms the lounge and makes the place look "finished" after 6 years of renovations and rearrangements. No sooner had the fitters left and SWMBO winged at me for still having my outdoor boots on . Guess I'll be getting slippers for krimbo.
. Guess I'll be getting slippers for krimbo.
.....i'm feckin about with plumberin again.
Want to reuse the nice, deep, but single basin, kitchen sink I took out by putting it in the utility. But it's going to be tight doing the pipework, so I want to fit flexi-tails instead of reuse the ones I already have on the monobloc tap, which is a nice one too.
So took them off, they have male ends with, as far as I can tell, 14mm ends with thread size of 1.5. But they are a bit weird cos they have a kind of shoulder on them at the end of the thread, followed by an O-ring that sits in a groove. Of course they sit dead tight together which accounts for the 4 sided spannery bit, so you can do them up.
I'll put a coupla pics up.
I'm afeared they are a special fitting and I will end up having to cut them down and fit a push-fit flexi to that. but the bastids have about 60mm of roughly 12mm (NOT 1/2") before it flares out to 15mm. So whatever I do doing this it'll extend everything further downwards than I want.
GGGGRRRRRRR!!!!!
and before anyone asks, they came with the feckin tap. Which is why I don't know the dimensions.
Think I'll give up for the day.
Want to reuse the nice, deep, but single basin, kitchen sink I took out by putting it in the utility. But it's going to be tight doing the pipework, so I want to fit flexi-tails instead of reuse the ones I already have on the monobloc tap, which is a nice one too.
So took them off, they have male ends with, as far as I can tell, 14mm ends with thread size of 1.5. But they are a bit weird cos they have a kind of shoulder on them at the end of the thread, followed by an O-ring that sits in a groove. Of course they sit dead tight together which accounts for the 4 sided spannery bit, so you can do them up.
I'll put a coupla pics up.
I'm afeared they are a special fitting and I will end up having to cut them down and fit a push-fit flexi to that. but the bastids have about 60mm of roughly 12mm (NOT 1/2") before it flares out to 15mm. So whatever I do doing this it'll extend everything further downwards than I want.
GGGGRRRRRRR!!!!!
and before anyone asks, they came with the feckin tap. Which is why I don't know the dimensions.
Think I'll give up for the day.
Very probably!!!!!Had my noo karpet fitted today. Transforms the lounge and makes the place look "finished" after 6 years of renovations and rearrangements. No sooner had the fitters left and SWMBO winged at me for still having my outdoor boots on
I am SOOOO chuffed.
The adaptor bought from Halfords has been running the cool box what I mended sometime back, all afternoon.
Nothing in the box at all except an empty chinese takeaway box with two thermomenters on it.
It dropped right down from room temp (20 degs C) to 7 or 6 degs. So fridge temp.
So throwing away the pcb and wiring it direct to the fans and the Peltier was all it took. and it can't hurt the car's batt as the socket it connects to is off when the key is out, or off.
RESULT!!!!!!!!
(Maybe not as good as it could have been when new but still very happy with it. )
The adaptor bought from Halfords has been running the cool box what I mended sometime back, all afternoon.
Nothing in the box at all except an empty chinese takeaway box with two thermomenters on it.
It dropped right down from room temp (20 degs C) to 7 or 6 degs. So fridge temp.
So throwing away the pcb and wiring it direct to the fans and the Peltier was all it took. and it can't hurt the car's batt as the socket it connects to is off when the key is out, or off.
RESULT!!!!!!!!
(Maybe not as good as it could have been when new but still very happy with it. )
Shimsteriom
Master Procrastinator
I'm still here.
Got my final blood test results today and I'm all clear.
I'm not going to shrug off my mortal coil in a hurry unless I do something stupid
Got my final blood test results today and I'm all clear.
I'm not going to shrug off my mortal coil in a hurry unless I do something stupid
Very pleased to hear that whatever it is that has plagued you has gone and done one and you are A-OK.I'm still here.
Got my final blood test results today and I'm all clear.
I'm not going to shrug off my mortal coil in a hurry unless I do something stupid
Good 4 you, must have been a big sigh of relief when you got the results. Big, luxury pizza to celebrate?I'm still here.
Got my final blood test results today and I'm all clear.
I'm not going to shrug off my mortal coil in a hurry unless I do something stupid
Shimsteriom
Master Procrastinator
I am so pleased.Good 4 you, must have been a big sigh of relief when you got the results. Big, luxury pizza to celebrate?
Strangely, after all the concern that I've had over the past few weeks I've decided to pass on the pizzas for now.
Back to the specialist for therapy thenStrangely, after all the concern that I've had over the past few weeks I've decided to pass on the pizzas for now.
