Hicap phill
Well-Known Member
It’s a roof inspection. It’s leaking & a report needs doing. Some parts can’t be reached so a drone was used.Lovely .… but what's 'appening??
Shimsteriom
Master Procrastinator
It's turned out to be a nice day after a fairly gloomy start.
doriz
Well-Known Member
It ain't often me and the Defenderer get on but HELLO. The ARB bushes and drop links all replaced with new fixings. After a wrestling match in burning sunshine I got the old bumps stops out, I say bumps stops, I obviously mean the metal plates that were remaining after the rubbers fell orft, so they're done.
The oil sump plug which was stuck in eventually fell to a Youtube hack - ordered a 29mm spanner and used a bottle jack to apply the leverage and hey presto it came undone without any rounding or damage - so i is well chuffed with todays efforts.
The oil sump plug which was stuck in eventually fell to a Youtube hack - ordered a 29mm spanner and used a bottle jack to apply the leverage and hey presto it came undone without any rounding or damage - so i is well chuffed with todays efforts.
Last edited:
Danny's shed of doom.......Update Saturday 13th of June 2020:
OK, its all done. I finished giving the entire floor 2 coats of varnish, finished all of the current shelving and their supports, mounted 4 LED lighting strips and carried a huge battery down there and wired it up.
Then I put some of the tools in there (and the scaffold-tower and the 4-stroke petrol, generator) and closed up for the day (my back was complaining like Billy-Oh!)
Next week I shall begin sorting through my workshop for all non-essential day to day tools and relocating them to the shed.
I am very pleased with how it has all turned out.
OK, its all done. I finished giving the entire floor 2 coats of varnish, finished all of the current shelving and their supports, mounted 4 LED lighting strips and carried a huge battery down there and wired it up.
Then I put some of the tools in there (and the scaffold-tower and the 4-stroke petrol, generator) and closed up for the day (my back was complaining like Billy-Oh!)
Next week I shall begin sorting through my workshop for all non-essential day to day tools and relocating them to the shed.
I am very pleased with how it has all turned out.
Gunfight at the "Crow-K Corral"....
We were alerted to a huge shindig of a fight down at the bottom of the garden where the crows have a nest in the oak tree that overhangs my new shed.
I was on my way down there to lock up and as I did so there was a large "thud" on the roof and lots more crow-cussing.
I didn't think much of it and locked up and went back indoors but the kerfuffle continued.
My wife and I walked back down there and one crow was chasing off another crow in an aerial dogfight.
All around the path at the doorway of the shed were black feathers and down the sloped "rain-drip" side was a dead juvenile crow on the ground.
I picked it up to see if it was just stunned or truly "gone". Its little chest had been pecked open and it was truly dead. Still with its little bum-fluff feathers among the proper adult ones.
Sad to see, but that is nature in the raw.
There always were 3-Crows, a mating pair and a male interloper. I reckon that's why they call it "A murder of Crows".
We were alerted to a huge shindig of a fight down at the bottom of the garden where the crows have a nest in the oak tree that overhangs my new shed.
I was on my way down there to lock up and as I did so there was a large "thud" on the roof and lots more crow-cussing.
I didn't think much of it and locked up and went back indoors but the kerfuffle continued.
My wife and I walked back down there and one crow was chasing off another crow in an aerial dogfight.
All around the path at the doorway of the shed were black feathers and down the sloped "rain-drip" side was a dead juvenile crow on the ground.
I picked it up to see if it was just stunned or truly "gone". Its little chest had been pecked open and it was truly dead. Still with its little bum-fluff feathers among the proper adult ones.
Sad to see, but that is nature in the raw.
There always were 3-Crows, a mating pair and a male interloper. I reckon that's why they call it "A murder of Crows".
Had a great morning chatting with my sister in law and her husband. This afternoon has been spent rebuilding an old 1" linisher with new bearings and a motor overhaul. Beautiful day, you wouldn't even know we are knee deep in a pandemic
doriz
Well-Known Member
Just gave the hanging baskets and pots a weekly feed. Last job ont defenderer were to torque up all the new fixings whilst she's sat on her wheels, ansom. Then I swept up all the rust and stuff that fell orft during maint which means its about a dustpan lighter again.
Last edited:
'Ere', she says, 'you grey ole lumpa wood'. ' Why not try this luvli purple shampoo I gots?'' It'll make yer silver noggin look luvverly.'
I has had a Pimms or two, so 'what the heck? Why not?' Says I. Let's go for it!
Now, skin an dair is mosly the same fing as I am sure my eloosidated kindred are aware. So..
Got a callous? Purple
Gots gnarly fingatips? Purple
Got a blistery fing from meltin paracord wif a lighter capable of solderin? Purple
Got a scar? Yep... Purple (Lotsa scars, ergo..)
Hopefully will fade come Mundi
I has had a Pimms or two, so 'what the heck? Why not?' Says I. Let's go for it!
Now, skin an dair is mosly the same fing as I am sure my eloosidated kindred are aware. So..
Got a callous? Purple
Gots gnarly fingatips? Purple
Got a blistery fing from meltin paracord wif a lighter capable of solderin? Purple
Got a scar? Yep... Purple (Lotsa scars, ergo..)
Hopefully will fade come Mundi
'Ere', she says, 'you grey ole lumpa wood'. ' Why not try this luvli purple shampoo I gots?'' It'll make yer silver noggin look luvverly.'
I has had a Pimms or two, so 'what the heck? Why not?' Says I. Let's go for it!
Now, skin an dair is mosly the same fing as I am sure my eloosidated kindred are aware. So..
Got a callous? Purple
Gots gnarly fingatips? Purple
Got a blistery fing from meltin paracord wif a lighter capable of solderin? Purple
Got a scar? Yep... Purple (Lotsa scars, ergo..)
Hopefully will fade come Mundi
Pics or your fibbing
J
doriz
Well-Known Member
Birra advice needed pals. The drag link on my fender if grabbed can be moved i.e. if you rotate it forward it moves about 20mm and if you rotate it backwards it also moves the same and I'm not sure it this is normal - bit hard to search for an answer online? The play is with the rubber part of the drop link, should this all be tight?
@HiCap @jamesmartin
@HiCap @jamesmartin
jamesmartin
Well-Known Member
it will rotate some its a ball joint, shouldnt have any play though
doriz
Well-Known Member
It's not side to side movement, I think its ok based on the fact it is a ball joint cheers.
Hicap phill
Well-Known Member
+1 on tube rolling on the joint. As long as no side to side or up & down all is good.
are you looking for jobs to do in Sunday
Hippo
Lord Hippo
Ah bin choppin terday. Eye be givun er zappa int saynsberrys so eye can zap me stuff un pak it as eye gows rand. It be fun. Eye as bortid free paks ov crumpets. Tu av gone int freeza. Eye assa towtal ov 24 crumpets. Eye has given me enry's there new bags. They be well chuffd. The longa pipe turned up terday. Me secund enry be well chufd ova it anorl un weeld oft ter show me ova enry. Gud job eye cort it befor it tryd ter go darn stair by its self. Oovers eh.
Me payntid flowa buds be causin trubul egen. Eye lay free ont top ov each ovva ont top of the wons eye screwd darn. The paynt onnem be dryd afta free days so it be ok. It be not. They as stuck ter geffa. Av gorrum apart. Bastids.
Funda un lite nin. Very very frite nin. Fer MEEEE.
Me payntid flowa buds be causin trubul egen. Eye lay free ont top ov each ovva ont top of the wons eye screwd darn. The paynt onnem be dryd afta free days so it be ok. It be not. They as stuck ter geffa. Av gorrum apart. Bastids.
Funda un lite nin. Very very frite nin. Fer MEEEE.
doriz
Well-Known Member
+1 on tube rolling on the joint. As long as no side to side or up & down all is good.
are you looking for jobs to do in Sunday
Got the oil change to do tomorrow. Then I have the tappets and rocker gasket to address before bushing the rear trailing arms. Once that's done I have the radiator, hoses coolant change, water pump and cam belt to do. Then I'll tackle the steering box leak and the bushes on the front radius arms
Shimsteriom
Master Procrastinator
Some funder somewhere... I can hears it
