2.5 TD and no problem, ill probs pop back over to it tonight and take a look, I'm almost positive my problem is the cables that i have pulled off under the bonnet at the loom...
well, if you get 12v at the spade(no 4) then check the connection terminal on the red/white wire to make sure it is ok. Then follow it along, checking for any splits and see where it goes and if anything's been tapped into it.
if you don't get 12v at the spade (no4) then check the thick brown wires(no2) have 12v.
I'd suspect the connection blocks engine bay side. Maybe you managed to plug one in wrong. try to match the known wires up (ie red/white from ignition to red/white to the starter) or they are corroded.
Last edited: