D90mitch Well-Known Member Apr 6, 2015 #1 Can someone please give me the torque settings for a D1 rear axle for the bolts that hold the drive flange on the half shafts and the ones that hold on the brake disc? Cheers.
Can someone please give me the torque settings for a D1 rear axle for the bolts that hold the drive flange on the half shafts and the ones that hold on the brake disc? Cheers.
robbh Crazier than a box of frogs on acid Apr 6, 2015 #2 Really tight, and really effin tight! 48lbf ft or 65NM for the drive flange and 54lbf ft or 73NM for the brake disc bolts. I use loctite on both.
Really tight, and really effin tight! 48lbf ft or 65NM for the drive flange and 54lbf ft or 73NM for the brake disc bolts. I use loctite on both.
markSX Active Member Apr 6, 2015 #3 I use, T = tight FT = F'ing tight YT = Yorkshire tight After YT comes, L = loose, you've snapped or stripped the fecker
I use, T = tight FT = F'ing tight YT = Yorkshire tight After YT comes, L = loose, you've snapped or stripped the fecker
robbh Crazier than a box of frogs on acid Apr 6, 2015 #4 markSX said: I use, T = tight FT = F'ing tight YT = Yorkshire tight After YT comes, L = loose, you've snapped or stripped the fecker Click to expand... :lol:
markSX said: I use, T = tight FT = F'ing tight YT = Yorkshire tight After YT comes, L = loose, you've snapped or stripped the fecker Click to expand... :lol:
DiscoPol Well-Known Member Apr 7, 2015 #6 Surely its RFT (really fookin tight) i use this setting for most things