The parts below were removed from a 1998 disco 1 v8.
I have a ZF 4hp22 autobox with
torque converter,
dip stick tube and dip stick,
gear selector and cable,
what i presume is kick down cable,
gearbox cooler lines,
gearbox cooler,
aluminium radiator/gearbox cooler.
I have not tested the autobox as the car came without an engine.
I would like to sell the above as a package for £650.
I can put on a pallet but will need your address to give you a quote.
Front axle complete with diff,half shafts,hub,discs,calipers and braided brake lines £300
Rear axle complete with diff half shafts,hub,discs,calipers (look new) and braided brake lines£300
front and rear yellow lift springs and yellow brit part shocks. Im unsure of lift, I suspect 2 inch but i can measure for you. £150
No pictures at the moment as its all stacked on a pallet But if your intrested let me know and i will try and get some pictures.
everything can be posted,pm for a price.

I’m interested in the top half of it I.e. all the gearbox gear if you could send some pictures. Could you also give a location of where you are?
Thanks

Initial photos, as you can see its in a stack of parts hence the photos. I can get more if required.
The transfer box and transfer shifter is not included.
Located on the isle of wight but as said i can stick on a pallet. The last pallet i sent was around £100.

Cheers. Cooler etc as per list all on interest too mate

My apologies, I was in a hurry to go out.
I can liberate it from the stack for better pictures if needed.

I should have some better pictures later on next week.

resto_d1 said:

I’m interested in the top half of it I.e. all the gearbox gear if you could send some pictures. Could you also give a location of where you are?
Thanks

Click to expand...

If you are thinking of putting this to your "hypedup" 4.6 build it wont last, just my opinion.
Sorry Russell.

J

You can uprate the zf4hp22 with hp24 parts so you still have a hydraulic box that can take more power.
If you are doing a project, look at my other bits.
I was going to try and do a more modern manual v8 project but have decided to go back to 2 wheels.
I have a
4.4 ajv8 /zf6hp26 with loom/electrics for engine and box
manual d3 box